11-Jan-2018, 01:56 PM
I just recently built a DalRC XR215 using the included PDB, Eachine VTX, Foxeer Arrow v3, Emax rs2205, and Racerstar 20a esc. I used a Eachine camera for a few days and it didn't have lines but color was bleached out so I installed my Foxeer camera with a 4 pin cable instead of the 7 pin cause I am waiting for a new cable. The 4 pin cable has VCC, ground, audio, and video it just don't have the osd, osd ground , and voltage sensor wires. Anyway I also started using a pigtail on VTX instead of right angle. I did add signal ground wires to all esc and they didn't have any before on same esc's when on my Wizard. I know that this is alot to consider but just a idea where to start would be great! Arrrrggghhh I had zero issues for months now everytime I replace something I another issue comes up! Thanks for any help or advice!