Hi all!

this is my new 5inch. Its my third 5 inch build.

This are the componets that im using:

• frame: designed by a friend of mine: https://www.instagram.com/p/BiR1oTllonR/...=o.alwaily 
  
• FC: Holybro Kakute F7
  
• ESC: Holybro Tekko32 35A 4in1 
  
• Motors: DYS Samguk 2306 2.500kv
  
• Vtx: Atlatl HV V2
  
• Rx: Frsky xm+
  
• Camera: Runcam Split (v1 camera and v2 board)
  

Some pictures, the frame:





Placing the esc's:



Then, solder the motor wires to the tekko32:




and adding the xt60 conector for the batteries:



Then placing the FC:




Those three wires (black, red and yellow) are for connecting the runcam split.

Here the camera its connected and the wires for the vtx:



Also i added to wires for connecting the runcam split to de fc via uart. But i dont know why, camera control through the FC don't works to me since i installed betaflight 3.5...:



Here i added a buzzer+leds:



the last thing, i soldered the xm+




And here its finished and ready to fly!!









thanks for watching and i hope you like it!!

Sweet build! Very clean and good components, it will be fun to fly I would bet!

Nice build, I like the design of the frame. Easy to replace arms. But with all those nice components, why the Banggood battery strap? Oscar would disapprove hahaha

Nice! You are using Split for HD recording? Don't you have excessive jello on HD video?

(01-Oct-2018, 06:25 AM)E.L.K. Wrote: Nice! You are using Split for HD recording? Don't you have excessive jello on HD video?

A properly set up quad shouldn't have any vibrations, video should be smooth

(30-Sep-2018, 09:05 PM)kaitylynn Wrote: Sweet build! Very clean and good components, it will be fun to fly I would bet!

Thanks!! Yes, since i build it, it's the one wich I fly more

(01-Oct-2018, 01:39 PM)RENOV8R Wrote: A properly set up quad shouldn't have any vibrations, video should be smooth

Sigh... In theory that's how it should be.... But I can't get rid of vibrations on my 130 build (tower), tried to balance props, redoing motors softmount several times... Seems like frame resonance? I don't know. Seems that everyone except me have vibration-free quads. ((:

(30-Sep-2018, 09:34 PM)RENOV8R Wrote: Nice build, I like the design of the frame. Easy to replace arms. But with all those nice components, why the Banggood battery strap? Oscar would disapprove hahaha

Thanks! Yes, I like a lot the frame. It looks very simple to replace the arms, but for the moment I haven't broke anyone

About the battery straps, yes, Oscar would disapproved it hahaha, but for shipping to Spain banggood it's a good option, and for the moment the quality of those straps is just good...

(01-Oct-2018, 06:25 AM)E.L.K. Wrote: Nice! You are using Split for HD recording? Don't you have excessive jello on HD video?

Yes, I'm using the split for recording HD (and for fpv)
I recently post a video with this quad (and my other 5inch) and both are recorded with the split, you can see it here
http://intofpv.com/t-my-first-bando--6700
For me, the quality of the split its quite good

(01-Oct-2018, 06:02 PM)Pablo Wrote: Yes, I'm using the split for recording HD (and for fpv)
I recently post a video with this quad (and my other 5inch) and both are recorded with the split, you can see it here
http://intofpv.com/t-my-first-bando--6700
For me, the quality of the split its quite good

The quality is perfect! Much better than I'm getting.

Looks great man!