24-Feb-2016, 12:44 AM
fantastic happy you finally got a set of goggles
My Diatone 240 Build |
24-Feb-2016, 12:44 AM fantastic happy you finally got a set of goggles 26-Feb-2016, 01:02 PM (24-Feb-2016, 12:44 AM)Oscar Wrote: fantastic happy you finally got a set of goggles I got them off eBay for a decent price. I'm waiting for my camera and transmitter from Banggood it has been nearly two weeks now. What sort of delivery times are people getting with Banggood orders? Current quad: ZMR 250 / DYS SE2205 / Littlebee 20A ESCs / Drone Lab 1500 4S / Naze32 Rev5 / BF 2.7.1 FPV: Runcam Skyplus / Aomway 200mw VTX / Fatshark DomV1 >>>>>>>>>>Check Out My Build<<<<<<<<<< 28-Feb-2016, 03:51 AM (26-Feb-2016, 01:02 PM)HamsterFPV Wrote:(24-Feb-2016, 12:44 AM)Oscar Wrote: fantastic happy you finally got a set of goggles From international warehouse to west coast USA takes 3 to 5 weeks. If I order out of USA warehouse it takes 1 week. I am a developing Racer - getting better..... BNF Quads: <250 Eachine>; <250 Walkera Advanced CC3D>; <250 Vortex Pro> Built: Dronz Fury 252 RX ; Speed Addict 210-R Building: <Deciding on Third build - Suggestions?> 28-Feb-2016, 01:39 PM (28-Feb-2016, 03:51 AM)Hebrews12v2 Wrote: From international warehouse to west coast USA takes 3 to 5 weeks. If I order out of USA warehouse it takes 1 week. It has been two weeks so far since it was dispatched, I hope it is closer to 3 rather than 5. Current quad: ZMR 250 / DYS SE2205 / Littlebee 20A ESCs / Drone Lab 1500 4S / Naze32 Rev5 / BF 2.7.1 FPV: Runcam Skyplus / Aomway 200mw VTX / Fatshark DomV1 >>>>>>>>>>Check Out My Build<<<<<<<<<< 01-Mar-2016, 11:32 PM They arrived! Just over two weeks from the Banggood China warehouse to the UK. I've just got to wire them in now. Current quad: ZMR 250 / DYS SE2205 / Littlebee 20A ESCs / Drone Lab 1500 4S / Naze32 Rev5 / BF 2.7.1 FPV: Runcam Skyplus / Aomway 200mw VTX / Fatshark DomV1 >>>>>>>>>>Check Out My Build<<<<<<<<<< 11-Mar-2016, 12:12 AM This build currently looks like this due to a bad crash. I'm currently working on the Naze32 board then it can go back together. Current quad: ZMR 250 / DYS SE2205 / Littlebee 20A ESCs / Drone Lab 1500 4S / Naze32 Rev5 / BF 2.7.1 FPV: Runcam Skyplus / Aomway 200mw VTX / Fatshark DomV1 >>>>>>>>>>Check Out My Build<<<<<<<<<< 11-Mar-2016, 12:14 AM very nice man friendly reminder: remember to check voltage before connecting the electronics 07-Apr-2016, 10:02 AM UPDATE I have flown the quad since with the repaired Naze32 board and the dodgy motor. I wasn't happy with the board and the motor struggles at high RPM, so not ideal. At the moment the quad is waiting for the new Naze32 board and the motor has been replaced with a new one. Trying to find a Naze32 Rev5 in the UK was difficult, only one supplier had one. My next board will probably be something F3 based. Current quad: ZMR 250 / DYS SE2205 / Littlebee 20A ESCs / Drone Lab 1500 4S / Naze32 Rev5 / BF 2.7.1 FPV: Runcam Skyplus / Aomway 200mw VTX / Fatshark DomV1 >>>>>>>>>>Check Out My Build<<<<<<<<<< 25-Apr-2016, 10:35 AM This build is coming to an end as I have bought a new frame. I found a ZMR 250 5mm arm version on eBay for a really good price. This is an upgrade for me as it's my first carbon frame, although the fibreglass frame has stood up really well so far. Current quad: ZMR 250 / DYS SE2205 / Littlebee 20A ESCs / Drone Lab 1500 4S / Naze32 Rev5 / BF 2.7.1 FPV: Runcam Skyplus / Aomway 200mw VTX / Fatshark DomV1 >>>>>>>>>>Check Out My Build<<<<<<<<<< 25-Apr-2016, 11:04 AM 5mm arms are crazy Make sure you have the right motor srew size available My quad: RD-210 / ZMX V3 2206 2140kv / Aikon SEFM 30A / X-Racer F303 V3 / X4R-SB / Dronelab 1500 4S 50C 25-Apr-2016, 11:14 AM (25-Apr-2016, 11:04 AM)Luc Wrote: 5mm arms are crazy Make sure you have the right motor srew size available I have some longer screws ready to go on it. I was surprised by the quality of the frame, especially for the price I paid. Current quad: ZMR 250 / DYS SE2205 / Littlebee 20A ESCs / Drone Lab 1500 4S / Naze32 Rev5 / BF 2.7.1 FPV: Runcam Skyplus / Aomway 200mw VTX / Fatshark DomV1 >>>>>>>>>>Check Out My Build<<<<<<<<<< Are you still flying those bullnose props? It may be just my opinion but they may be too heavy for this motor, especially BN kind. I'm talking about loss in performance of the entire build. I found 5040 props to be perfect for 1806 dys. GF5045 non-bullnose made little to no difference, they just suck more lipo juice. With 5045 bullnose I actually felt loss of power. EDIT: this might be less noticeable on 3S Find me on Youtube and Instagram. I currently fly: DRC Aura, NOX5R, Minimalist 112 and drive a scrap RC car 25-Apr-2016, 01:50 PM (25-Apr-2016, 12:15 PM)Konrad Stepanajtys Wrote: Are you still flying those bullnose props? It may be just my opinion but they may be too heavy for this motor, especially BN kind. I'm talking about loss in performance of the entire build. I found 5040 props to be perfect for 1806 dys. GF5045 non-bullnose made little to no difference, they just suck more lipo juice. With 5045 bullnose I actually felt loss of power. I will be changing the motors soon to something more suited to BN props. Current quad: ZMR 250 / DYS SE2205 / Littlebee 20A ESCs / Drone Lab 1500 4S / Naze32 Rev5 / BF 2.7.1 FPV: Runcam Skyplus / Aomway 200mw VTX / Fatshark DomV1 >>>>>>>>>>Check Out My Build<<<<<<<<<< |
« Next Oldest | Next Newest » |
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
Build Helios - 3.5” Sub-250g (Sub 160g possible) DJI O3 Drone – Frame/Build Thread | Recursion | 12 | 1,592 | 25-Mar-2024, 10:28 PM Last Post: Recursion | |
Build 5in lightweight build | hawk01 | 37 | 1,166 | 22-Mar-2024, 10:56 AM Last Post: Jossey | |
Build Whoosh - 3.5" build. PID settings? | maxer | 23 | 1,094 | 30-Dec-2023, 08:29 PM Last Post: SnowLeopardFPV | |
5 " build | jajifpv | 7 | 366 | 13-Dec-2023, 02:11 PM Last Post: jajifpv | |
A 4" build that never flew (The Ronin mk2 is alive!) | drumgod | 20 | 932 | 12-Dec-2023, 06:34 PM Last Post: drumgod |