Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 2 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
My Diatone 240 Build
#1
Hi everyone.

This is my first mini quad build, having built a tricopter a few years ago. I recently got back into multirotors a few months ago and I was surprised by how much the technology has progressed. When I built my tricopter 32 bit flight controllers didn't even exist.

Onto the build.

Parts List:
  • Diatone #31 Silver Blade 240 Glass Frame
  • DYS 1806 motors
  • Emax 12A speed controllers
  • Naze32 Rev5 Acro Flight Contoller
  • Turnigy Nano-Tech 1300mah 45C 3S
  • 5045 props
Parts to Buy:
  • Runcam Skyplus FPV Camera
  • Aomway 200mw Video Transmitter
  • Skyzone Goggles
Currently I'm LOS as I don't currently have any FPV gear. My transmitter is a Spektrum DX6i which I have had for years and has served me well.

[Image: MePNFkq.jpg]

Frame built and ready for components.

[Image: DadAIuM.jpg]

DYS 1806 motors fitted.

[Image: 11QrH55.jpg]

Soldered the Naze32, ready to be fitted.

[Image: t768QaZ.jpg]

Bought a few Nano-Techs 3S lipos.

[Image: zwdQet4.jpg]

All finished for now, this is after I tidied up the wiring but there is still some to go.

Feel free to make any suggestions.
Current quad: ZMR 250 / DYS SE2205 / Littlebee 20A ESCs / Drone Lab 1500 4S / Naze32 Rev5 / BF 2.7.1
FPV: Runcam Skyplus / Aomway 200mw VTX / Fatshark DomV1
>>>>>>>>>>Check Out My Build<<<<<<<<<<
Reply
Login to remove this ad | Register Here
#2
Looks like a solid build would be great to get some pictures up Smile
lol FPV
Ragg-e WBX 5"
BUILD
MY CHANNEL
Reply
#3
(12-Feb-2016, 12:41 PM)dronehq Wrote: Looks like a solid build would be great to get some pictures up Smile

Thanks, I will get some pictures up this afternoon.
Current quad: ZMR 250 / DYS SE2205 / Littlebee 20A ESCs / Drone Lab 1500 4S / Naze32 Rev5 / BF 2.7.1
FPV: Runcam Skyplus / Aomway 200mw VTX / Fatshark DomV1
>>>>>>>>>>Check Out My Build<<<<<<<<<<
Reply
#4
(12-Feb-2016, 12:43 PM)HamsterFPV Wrote:
(12-Feb-2016, 12:41 PM)dronehq Wrote: Looks like a solid build would be great to get some pictures up Smile

Thanks, I will get some pictures up this afternoon.

Hey buddy.

Looks like a good build from my little knowledge.

You say you're looking to get the Runcam FPV cam and the Aomway 200mW VTX. Just a quick thing, I can't find either of these in stock anywhere in the UK. If you're based in the UK too, I'd be happy to go halves on an order that you make if you double up, so we can reduce the international shipping cost, if that's something you'd have to pay. PM me if interested.
Reply
#5
(12-Feb-2016, 01:58 PM)danbt Wrote: Hey buddy.

Looks like a good build from my little knowledge.

You say you're looking to get the Runcam FPV cam and the Aomway 200mW VTX. Just a quick thing, I can't find either of these in stock anywhere in the UK. If you're based in the UK too, I'd be happy to go halves on an order that you make if you double up, so we can reduce the international shipping cost, if that's something you'd have to pay. PM me if interested.

I was going to order them from Banggood which is free shipping anyway. The only problem is customs charges but I've ordered from HK a few times and never had a problem. My orders have always been small which may be the reason I have never been charged.
Current quad: ZMR 250 / DYS SE2205 / Littlebee 20A ESCs / Drone Lab 1500 4S / Naze32 Rev5 / BF 2.7.1
FPV: Runcam Skyplus / Aomway 200mw VTX / Fatshark DomV1
>>>>>>>>>>Check Out My Build<<<<<<<<<<
Reply
#6
I've just done a quick weight check on the quad with and without the battery, pictures below:

[Image: L7k5Sem.jpg]

316 grams without the battery (no FPV gear yet)


[Image: Pga0ZMg.jpg]

430 grams with a 1300 mAh 3S lipo.

Once I have my FPV gear and recording camera I expect the weight to be over 500 grams.
Current quad: ZMR 250 / DYS SE2205 / Littlebee 20A ESCs / Drone Lab 1500 4S / Naze32 Rev5 / BF 2.7.1
FPV: Runcam Skyplus / Aomway 200mw VTX / Fatshark DomV1
>>>>>>>>>>Check Out My Build<<<<<<<<<<
Reply
#7
great clean build Smile just make sure you don't crash to hard Smile fibre glass is a bit fragile
Don't be a LOS'er, be an FPV'er :)  My Gear - Facebook - Instagram - Twitter
Reply
#8
Hamster would you recommend this frame or go for something like a ZMR 250 ?
lol FPV
Ragg-e WBX 5"
BUILD
MY CHANNEL
Reply
#9
(13-Feb-2016, 11:46 PM)dronehq Wrote: Hamster would you recommend this frame or go for something like a ZMR 250 ?

I would go with the ZMR as it is carbon.
Current quad: ZMR 250 / DYS SE2205 / Littlebee 20A ESCs / Drone Lab 1500 4S / Naze32 Rev5 / BF 2.7.1
FPV: Runcam Skyplus / Aomway 200mw VTX / Fatshark DomV1
>>>>>>>>>>Check Out My Build<<<<<<<<<<
Reply
#10
(14-Feb-2016, 12:55 AM)HamsterFPV Wrote:
(13-Feb-2016, 11:46 PM)dronehq Wrote: Hamster would you recommend this frame or go for something like a ZMR 250 ?

I would go with the ZMR as it is carbon.

thanks man can't wait to see this flying FPV  Wink
lol FPV
Ragg-e WBX 5"
BUILD
MY CHANNEL
Reply
#11
Went out and flew LOS for a few packs yesterday. Only had one crash and it didn't even break a prop, I lost orientation and hit the ground.

[Image: GUifYY6.jpg]

A mate of mine also flew a 450 quad which ended up with a missing prop.

[Image: 2a4FqIj.jpg]

A decent morning of flying, it's the first time I've tried full throttle and I didn't realise just how powerful it is 4S must be crazy.
Current quad: ZMR 250 / DYS SE2205 / Littlebee 20A ESCs / Drone Lab 1500 4S / Naze32 Rev5 / BF 2.7.1
FPV: Runcam Skyplus / Aomway 200mw VTX / Fatshark DomV1
>>>>>>>>>>Check Out My Build<<<<<<<<<<
Reply
#12
looks like a fun meet up Smile the frame looks empty, need to fill it up with FPV gear Smile hehe
Don't be a LOS'er, be an FPV'er :)  My Gear - Facebook - Instagram - Twitter
Reply
#13
(21-Feb-2016, 08:32 PM)Oscar Wrote: looks like a fun meet up Smile the frame looks empty, need to fill it up with FPV gear Smile hehe

Sometime next week hopefully, my FPV gear is currently stuck halfway across the world. Also managed to get some Dominators from eBay.
Current quad: ZMR 250 / DYS SE2205 / Littlebee 20A ESCs / Drone Lab 1500 4S / Naze32 Rev5 / BF 2.7.1
FPV: Runcam Skyplus / Aomway 200mw VTX / Fatshark DomV1
>>>>>>>>>>Check Out My Build<<<<<<<<<<
Reply
#14
(21-Feb-2016, 02:52 PM)HamsterFPV Wrote: Went out and flew LOS for a few packs yesterday. Only had one crash and it didn't even break a prop, I lost orientation and hit the ground.

[Image: GUifYY6.jpg]

A mate of mine also flew a 450 quad which ended up with a missing prop.

[Image: 2a4FqIj.jpg]

A decent morning of flying, it's the first time I've tried full throttle and I didn't realise just how powerful it is 4S must be crazy.


Wow that 450 looks gorgeous  Wink Wink Wink 
The owner must be a bad ass
lol FPV
Ragg-e WBX 5"
BUILD
MY CHANNEL
Reply
#15
Got a pair of Dominator V1 goggles from eBay for a decent price, so all I'm waiting for now is my camera and transmitter. The goggles themselves are in really good condition and haven't been used much.

[Image: kn9644R.jpg]
Current quad: ZMR 250 / DYS SE2205 / Littlebee 20A ESCs / Drone Lab 1500 4S / Naze32 Rev5 / BF 2.7.1
FPV: Runcam Skyplus / Aomway 200mw VTX / Fatshark DomV1
>>>>>>>>>>Check Out My Build<<<<<<<<<<
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Build Rekon5 UL 5" build ph2t 51 7,986 12-Apr-2024, 02:26 AM
Last Post: ph2t
  Build Micro Apex 4" Build drumgod 8 390 11-Apr-2024, 12:05 AM
Last Post: BigBeard
  Build Helios - 3.5” Sub-250g (Sub 160g possible) DJI O3 Drone – Frame/Build Thread Recursion 12 1,857 25-Mar-2024, 10:28 PM
Last Post: Recursion
  Build 5in lightweight build hawk01 37 1,360 22-Mar-2024, 10:56 AM
Last Post: Jossey
  Build Whoosh - 3.5" build. PID settings? maxer 23 1,165 30-Dec-2023, 08:29 PM
Last Post: SnowLeopardFPV


Login to remove this ad | Register Here