Posts: 69
Threads: 28
Likes Received: 1 in 1 posts
Likes Given: 0
Joined: Apr 2016
Reputation:
0 With BLHeli_S you should really use Multishot for best performance, but you will need to run at least 2K looptime in order to run Multishot.
For your gear, you should be able to run 4K/4K and Multishot on safely. You can try even higher but might give you desync, this is probably safer.
• Posts: 947
Threads: 66
Likes Received: 350 in 248 posts
Likes Given: 164
Joined: Apr 2016
Reputation:
34 isn't the xracer V3.1 able to run 8k/8k with the latest betaflight? I havn't used mine in a while, but think I remember I was able to run it on 8k/8k on betaflight 2.9.1
• Posts: 1,070
Threads: 70
Likes Received: 742 in 378 posts
Likes Given: 577
Joined: Jan 2016
Reputation:
44 That was probably before betaflight pid controller was introduced.
• Posts: 5,315
Threads: 672
Likes Received: 3,155 in 1,743 posts
Likes Given: 2,030
Joined: Jan 2016
Reputation:
139 With SPI Gyro Bus 8k/8k should be possible, but it depends on the setup i found... one at least one setup I can run at most 8K/4K... CPU just hit the ceiling when I turn looptime up to 8K...
• Posts: 236
Threads: 2
Likes Received: 66 in 45 posts
Likes Given: 27
Joined: Jan 2016
Reputation:
17 Disable blackbox and other features. F3 can run BF3 8/8 after some optimizations in code which are currently researched.
• Posts: 1
Threads: 0
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Dec 2016
Reputation:
0 I've got a f3 spracing fc and I'm running 4k/4k and cpu is 33% on the bench. is this acceptable. I don't want to turn off my acc, cuz I'm still newish and I like the stabilization when I come in for landing. after take off I flip into acro.
•