27-Mar-2016, 01:45 AM
This time i am reviewing the micro quad flight controller from Multiflite, the Nano-B!
The cool thing about it is, you can plug extended modules on top of the FC to enable functionality.
For example here is the FC board and VTX module:
Here is a summary of the features:
My full review: http://blog.oscarliang.net/multiflite-fc...icro-quad/
The cool thing about it is, you can plug extended modules on top of the FC to enable functionality.
For example here is the FC board and VTX module:
Here is a summary of the features:
- 32 bit FC, so supports Cleanflight
- Pads for Mag and Baro available (expansion supports in future I guess)
- 6 Brushed motor outputs, support Quadcopter and Hexacopter config
- 8A N-Channel-FET’s
- Supports VBAT – battery voltage monitoring
- Spektrum Satellite or PPM RX
- Support RSSI PWM to Analog (RC circuit) on ADC5
- 3.3v Buck/Boost regulator (no brownouts) for super clean power
- Support for WS2811 or WS2812 programmable RGB LED
- Support for Buzzer for low battery warning and lost model alarm (bright LED could also be used)
My full review: http://blog.oscarliang.net/multiflite-fc...icro-quad/