Evening gents,
So, my zmr seems to be plagued by issues.
Truly, not even Windows 2000 gave me so many headaches...
So, flashed betaflight, flashed blheli, and all motors except one are ok.
The one just decides to jitter when powered on.
If I unplug (de-solder) the signal wire, it stops.
The esc was also heating up for no reason.
So I decided to solder the power leads of the "faulty" esc to a different pad on the pdb and plug the signal lead directly to the naze.
Same issue.
I'm lost for a solution. Tomorrow I'm replacing uh with a new spare I have just to test.
Funny thing is that I can bro and the motor responds perfect to input.
Any suggestions are more than welcome!!
Here is a video of the problem
So, my zmr seems to be plagued by issues.
Truly, not even Windows 2000 gave me so many headaches...
So, flashed betaflight, flashed blheli, and all motors except one are ok.
The one just decides to jitter when powered on.
If I unplug (de-solder) the signal wire, it stops.
The esc was also heating up for no reason.
So I decided to solder the power leads of the "faulty" esc to a different pad on the pdb and plug the signal lead directly to the naze.
Same issue.
I'm lost for a solution. Tomorrow I'm replacing uh with a new spare I have just to test.
Funny thing is that I can bro and the motor responds perfect to input.
Any suggestions are more than welcome!!
Here is a video of the problem