Posts: 78
Threads: 14
Likes Received: 13 in 9 posts
Likes Given: 1
Joined: Nov 2016
Reputation:
0 So, I have my MinimOSD connected to my Kombini FC and VTX. I can connect to MinimOSD via the GUI using the Kombini passthrough. When I use the 'restart' option in the GUI everything shows up as expected/programmed on my video. However, when I pull all power and power up the quad there seems to be an alignment issue as i can just see the bottom of my OSD text right at the top of the screen - however this text should be at the bottom of the screen. If I leave the quad powered on but pull the VTX power to just power cycle the VTX/OSD I don't get any OSD.
Anyone had this before?
• Posts: 5,315
Threads: 672
Likes Received: 3,155 in 1,743 posts
Likes Given: 2,030
Joined: Jan 2016
Reputation:
139 have you set PAL/NTSC correctly on the OSD to match that on your camera?
• Posts: 78
Threads: 14
Likes Received: 13 in 9 posts
Likes Given: 1
Joined: Nov 2016
Reputation:
0 It's set to auto, and when it does work, it shows PAL detected correctly.
I'll play a bit more this evening. Few things are different like my old FC was running cleanflight and new is running betaflight. Noticed there are different flags for each in the config.h file so I'll update that and try again.
• Posts: 5,315
Threads: 672
Likes Received: 3,155 in 1,743 posts
Likes Given: 2,030
Joined: Jan 2016
Reputation:
139 If the image is working correctly and it's just the text, can you not move them up in positions in the configurator?
• Posts: 78
Threads: 14
Likes Received: 13 in 9 posts
Likes Given: 1
Joined: Nov 2016
Reputation:
0 Got it working, seemed great. Somehow it was setup to turn the OSD off with the flight mode switch in a certain position, and I had been testing with my RC TX off. Turned the RC TX on and it started working!
So I got on with calibrating ESCs etc, and now it's stopped working again! Don't seem to be able to flash it now or connect to the configurator via FTDI. Weird, will try again tonight.
•