Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
MinimOSD full of chinese/japanese characters and "V" osd
#1
I am just setting up my Micro minimOSD, but it comes up with this randomness (lots of V and Japanese/chinese characters on the screen)

I have checked tx/rx. Any ideas?


Attached Files Thumbnail(s)
   
Reply
Login to remove this ad | Register Here
#2
I've been having the same problem on a osdoge and pz0420m.. I've tried everything but just stopped using that combination unsure
Which camera do you use?

Found out mine was triggered as soon as I powered the camera from the osd, don't know it if helps, could be a bad flash of mwosd also
Reply
#3
the easy way is hook it up to the GUI and upload a new font! You need to update the "charset" again. Or try a different charset, firmware combo. Mine did this too and I fixed it by going with a different charset. I can't remember what one though.
Reply
#4
(19-May-2016, 07:30 PM)CurryCat Wrote: the easy way is hook it up to the GUI and upload a new font! You need to update the "charset" again. Or try a different charset, firmware combo. Mine did this too and I fixed it by going with a different charset. I can't remember what one though.

Thanks it worked. re-uploading the font fixed it. It must have been corrupted at the last second or maybe I didn't let it complete.
[-] The following 1 user Likes SonicCopter's post:
  • Akuwu
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Help OSD Not Displaying Victory FPV 11 420 20-Mar-2024, 11:43 AM
Last Post: Victory FPV
  Black video but with OSD Dexter 6 201 08-Mar-2024, 10:42 AM
Last Post: Dexter
  Black screen and no OSD: Eachine TX06 + EV800 + DarwinFPV F411 Ultralight/Whoop AIO aprudnikoff 1 99 05-Mar-2024, 09:18 PM
Last Post: hugnosed_bat
  I don't want OSD zomer 2 213 18-Feb-2024, 05:40 AM
Last Post: Pathfinder075
  Help Foxeer Reaper + Foxeer CAT 3 + SB f405 v3 no OSD AlexMM 6 520 07-Nov-2023, 10:54 AM
Last Post: voodoo614


Login to remove this ad | Register Here