I was able to upload successfully MWOSD R1.6 to my Mini Minim OSD (with KV team mod) using Arduino 1.6.12.

Now with the Mini Minim OSD still connected, I'm trying to connect to it in MWOSD R1.6 GUI.

I get the message "Waiting OSD ..."

RX green in the software. TX flashing on the FDTI board.

Using windows 10 64 bit.
Java SE Development Kit 8u111
Baud rate same in gui (COM 3) and device manager/Ports/USB Serial Port (COM 3)

I tried to inverse TX and RX.
I rebooted my machine.

No luck.

Thanks for your help.

I found the solution here: https://quadmeup.com/how-to-flash-mw-osd...-minimosd/
Even if Arduino said upload ok, it was not ok.
I changed the board from "Lilypad Arduino" to "Arduino Pro or Pro Mini" and reuploaded.
Now MWOSD finds my mini MinimOSD.

Cool, so you fixed it?
I have been having this problem as well and I am stuck with MWOSD 1.4 for that reason...

(04-Nov-2016, 04:30 PM)Oscar Wrote: Cool, so you fixed it?
I have been having this problem as well and I am stuck with MWOSD 1.4 for that reason...

Yes, Fixed !