I get garbage characters.
I found the faq but it didn't help. My FDTI board provides 5V. I've checked with a multimeter.
I reuploaded a couple of times.
Don't know what to do next.
----
14 I get garbage characters and / or font upload doesn't work.
I found the faq but it didn't help. My FDTI board provides 5V. I've checked with a multimeter.
I reuploaded a couple of times.
Don't know what to do next.
----
14 I get garbage characters and / or font upload doesn't work.
- Sounds like fonts need to be re-uploaded - but note:
- The output stage (max chip) MUST be powered when uploading font. How depends upon your board / configuration
- A programming voltage of 4.8v or higher is required.
- Note some programmers have 3.3v/5v selection text swapped. Verify with a meter
- Some stacked boards with USB connector also require vbat connected which powers the MAX chip and enables font upload