If you enjoy our forum, why not join us? :) Click here to register in a few simple steps

Login to remove this ad | Register Here
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Micro FPV cam, integrated vtx + DVR
#1
So I ask and BG deliver!

Micro FPV camera with integrated VTX and DVR, switchable power output 0, 25, 50, 200mW, all in at 6.8g see here

Any chance there will be a 1000TVL version?
#2
well there is a weak point of this construction, look at the crystal.. it is standing on 2 legs and it is not supported with any touch of glue..
assuming that you would use it as gently as i'm (smack! Crash! ooops that was a tree?!)

such weakpoint will fall off and after 2-3 crashes it will be useless.
so as you will get one ensure that this "tube" is glued to something and will not fall off due to vibration.
All the best
Grzesiek (Grisha/ Greg)

Curently flyable: Nox 5, Nox 3
Bench / in progres: ZMRX(scrap build)
thinking about building: 450
Reply
#3
(12-30-2016, 01:50 AM)Grisha0 Wrote: assuming that you would use it as gently as i'm (smack! Crash! ooops that was a tree?!)

Lol!
This is exactly how gently I would use it! Also just thinking about how long an SD card is going to last and if it might get corrupted during a crash or maybe even just from vibration..?
Reply
Login to remove this ad | Register Here
#4
hmmm sd cards in my experience are quite durable... and they have survived (so far) every crash (including water landing)

few things that im curious:
- does it record on power or you need to "click" record
- does it remember the last power setting or always you need to cycle from 0mw to ie 200
- image quality
All the best
Grzesiek (Grisha/ Greg)

Curently flyable: Nox 5, Nox 3
Bench / in progres: ZMRX(scrap build)
thinking about building: 450
Reply
#5
(12-30-2016, 10:44 AM)Grisha0 Wrote: hmmm sd cards in my experience are quite durable... and they have survived (so far) every crash (including water landing)

few things that im curious:
- does it record on power or you need to "click" record
- does it remember the last power setting or always you need to cycle from 0mw to ie 200
- image quality

My SD card recently stopped working, it was a cheapie though.

According to the manual - it starts recording as soon as the SD card is put in, press button to stop then press button to start again and it does 'remember' power selection.

as for image quality, we shall see!
Pun intended!
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Micro MinimOSD VideoIN shorts to GROUND? fpvmonkey 3 592 04-07-2016, 07:34 AM
Last Post: Luc
  Help Good micro FPV pod orejass 3 354 02-12-2016, 10:34 PM
Last Post: HamsterFPV
  Discussion How much current does micro MinimOSD draw Oscar 2 8,196 01-27-2016, 10:28 AM
Last Post: KonradS