Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Matek AIO PDB-F4-OSD-FC
#1
Thumbs Up 
anybody tried these Matek AIO PDB-OSD-BARO-BBOX-DSHOT-F4FC?

https://www.banggood.com/Matek-Systems-B...rehouse=CN
[Image: 42945323-0261-489d-ae74-a43c5755d2e1.jpg]
Reply
Login to remove this ad | Register Here
#2
Here is an overview / comparison of the new Matek F405 CTR FC to the old AIO FC.
Don't be a LOS'er, be an FPV'er :)  My Gear - Facebook - Instagram - Twitter
Reply
#3
(15-Dec-2017, 09:05 PM)Oscar Wrote: Here is an overview / comparison of the new Matek F405 CTR FC to the old AIO FC.

so 2 questions
what is the cap for that is soldered on the xt60 connector?
hows it fly?
Reply
#4
(17-Dec-2017, 03:44 AM)buzzjob Wrote: so 2 questions
what is the cap for that is soldered on the xt60 connector?

this will answer your question:
https://oscarliang.com/capacitors-mini-quad/

(17-Dec-2017, 03:44 AM)buzzjob Wrote: hows it fly?

not sure yet, only a few reviewers have got it, excluding myself.
Don't be a LOS'er, be an FPV'er :)  My Gear - Facebook - Instagram - Twitter
Reply
#5
think i'm getting some caps !
thanks Oscar
Reply
#6
RMRC has a good supply of caps. I use 470 uF, one on each ESC. It's best to make these a part of your mock up for a new build, it can be tricky trying to just stick them on after the fact, as they do take up a little room

https://www.readymaderc.com/store/index....ts_id=6526
Reply
#7
i think i have some but they are for mounting on circuit boards pads.
once one on my ER250 got knocked off in a hard crash ,battery got loose
and so i bought 10 just in case ...but now i strap em in both directions , batteries that is.

you know they were there all along on the ER250 PDB and i didn't know what they did
good to know guys thanks

i found these for a good price slightly shorter by 4mm than the ones at RMRC ..
mouser $0.31ea tolerance is not listed on the RMRC caps so can't compare
https://www.mouser.com/ProductDetail/Nic...JkQAvD_BwE
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Help Problem with GEP-F411-35A AIO + VTX V1 Walksnail Adam0880 2 245 09-Mar-2024, 08:35 PM
Last Post: Adam0880
  Help Problem accessing the ESP8285 chip on MATEK FC F405 WTE remi.auge 2 144 05-Mar-2024, 12:49 PM
Last Post: remi.auge
  Flywoo AIO BF4.4.3 ESC question husafreak 4 142 03-Feb-2024, 03:32 AM
Last Post: husafreak
  AXISFLYING ARGUS F722 40A AIO hawk01 5 208 22-Jan-2024, 10:34 PM
Last Post: hawk01
  JHEMCU GHF722 AIO 40A hawk01 1 143 20-Jan-2024, 05:21 PM
Last Post: BadRaven


Login to remove this ad | Register Here