Posts: 3
Threads: 1
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: May 2023
Reputation:
0 Hello to all,
I'm newbie in to FPV drone and have bougth the subject FC to run some experiments. Probably pressing "Reset" in betaflight configurator without ready backup was not a good idea, but Im here and I wonder if someone have clean or at least workable MK4 backup?
Thanks!
• Posts: 4,073
Threads: 75
Likes Received: 2,548 in 1,858 posts
Likes Given: 3,949
Joined: May 2021
Reputation:
121 You can grab the factory firmware from Diatone’s product page here:
https://www.diatone.us/products/mb-mk4-f722-mini-fc Scroll down to “Firmware”. You’ll need to select the correct one for whatever gyro your board has.
Dangerous operations.
Disclaimer: I don’t know wtf I’m talking about.
I wish I could get the smell of burnt electronics out of my nose.
• Posts: 3
Threads: 1
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: May 2023
Reputation:
0 Well, the FW seems to work, but the list of ports in the "Ports" section is empty, so I cant configure any peripheral.
• Posts: 3
Threads: 1
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: May 2023
Reputation:
0 Thanks for the link, seems the FW pack har the configuration inside.
•