Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Mag and Baro not showing in cleanflight
#1
Hello,

Thanks to a ton of help and advice from this forum I was able to get my flight controller connecting and flashed to the latest firmware. 

HOWEVER: Once I connect the FC is working great from a gyro perspective however it is not highlighting the MAG/BARO options in the top. 

I am using SPF3 Deluxe and running 2.0.1 firmware. I have tried reflashing the firmware and reconnecting. No luck. The quad shows the correct movement in the preview but the options are grey and the calibrate magnetometer is also grey.

Let me know what i need to do!

Thank you all


*EDIT - Also tried using betaflight and flashing to latest version 3.1.7 and I get the same results.
Reply
Login to remove this ad | Register Here
#2
Mag and baro are disabled by default. Just go into the CLI to enable
[-] The following 2 users Like RENOV8R's post:
  • PaulMek, aziassassin
Reply
#3
(21-Apr-2017, 02:51 AM)RENOV8R Wrote: Mag and baro are disabled by default.  Just go into the CLI to enable

WOW you are a life saver. I did a search on the cleanflight.md and found the below info. Can you tell me how I would know what to select?

MAG_HARDWARE
0 = Default, use whatever mag hardware is defined for your board type ; 
1 = None, disable mag ; 
2 = HMC5883 ; 
3 = AK8975 ; 
4 = AK8963 
(for versions <= 1.7.1: 1 = HMC5883 ; 2 = AK8975 ; 3 = None, disable mag)

BARO_HARDWARE
0 = Default, use whatever mag hardware is defined for your board type ; 
1 = None, 
2 = BMP085, 
3 = MS5611, 
4 = BMP280

*EDIT - I tried AUTO and then did a dump to confirm it took. It did so I disconnected and reconnected but still nothing...]
*EDIT2 - After reconnecting the changes did not save.... Looking into how to make it save now.
*EDIT# - Im a goof. I ran the save command and YAY ITS WORKING!! Thank you so much!
[-] The following 1 user Likes aziassassin's post:
  • sloscotty
Reply
#4
Glad you got it figured out! Just watch your CPU load with all that shtuff turned on.
[-] The following 1 user Likes RENOV8R's post:
  • Drone0fPrey
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
Sad M10 GPS not showing in Betaflight Fuzzi 9 801 14-Jan-2024, 10:56 PM
Last Post: Coleon
  OSD not showing all the time Luizmazza 1 147 21-Dec-2023, 11:10 AM
Last Post: SnowLeopardFPV
  Anyone know if i could update a hyperion vengeance cleanflight 1.10 to betaflight? DethRattles 41 912 10-Dec-2023, 09:54 PM
Last Post: DethRattles
  Turnigy evolution pro flight switch issues and switching from cleanflight 1.2.4 DethRattles 6 311 28-Nov-2023, 06:04 AM
Last Post: DethRattles
  F210-3D / CleanFlight Coleon 10 810 13-Oct-2023, 01:08 PM
Last Post: hugnosed_bat


Login to remove this ad | Register Here