Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
LUX F3 - BetaFlight 2.6.1 Stock LuxFloat PIDs issue...
#1
Hi,

I've just installed a LUX F3 on my new QAV-R 5'.
I'm used to BetaFlight on Naze32 so did flash that new board with 2.6.1.
Strange enough, when selecting the LuxFloat controller in CleanFlight, I get the same Stock PIDs as for Rewrite controller.
I guess there is an issue somewhere...
Could one of you post a copy of the BetaFlight 2.6.1 LuxFloat stock PIDs here? 
Or help me finding why I don't get them after flashing the card again?

Thanks in advance for your advices.

Pascal
Reply
Login to remove this ad | Register Here
#2
LUX PIDS and Rewrite are now pretty much the same, in the way they are displayed in 2.6.1, Starting around 4.5, 4.5 9.0,

From memory I think now on the Lux pids of 2.6.1 , 4 equals 1 in the old LUX, if that makes sense.
My youtube channel

Reply
#3
(18-Apr-2016, 01:07 PM)BigglesFPV Wrote: LUX PIDS and Rewrite are now pretty much the same, in the way they are displayed in 2.6.1, Starting around 4.5, 4.5 9.0,

From memory I think now on the Lux pids of 2.6.1 , 4 equals 1 in the old LUX, if that makes sense.

Thanks BigglesFPV.

I had not noticed that change in BF 2.6.x.
My last BF setup was on 2.5.3.


Should have read the new releases notes more carefully.
Reply
#4
You don't read the release log!! Big Grin

back in 2.6.0, it says:
Luxfloat pids changed to integer and increased in configurable range. All pid controllers now share same PID bank. Luxfloat pids are now scaled to be close to rewrite.
Don't be a LOS'er, be an FPV'er :)  My Gear - Facebook - Instagram - Twitter
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Announcement PSA: BMI270 Gyro - Hardware / Tracking Issue SnowLeopardFPV 25 833 07-Feb-2024, 02:39 PM
Last Post: Luk5569
  Issue "Mixer Mode Problem detected" need help Steven FPV 9 260 24-Jan-2024, 06:36 AM
Last Post: Steven FPV
  Bringing an old betaflight target into 4.4.0 husafreak 10 1,357 22-Nov-2023, 02:45 PM
Last Post: Pathfinder075
  What happens when I load a Betaflight Preset Tune in my FC? husafreak 6 449 07-Nov-2023, 02:56 AM
Last Post: husafreak
  No betaflight connection with just USB aerokam 5 334 20-Oct-2023, 05:44 PM
Last Post: SnowLeopardFPV


Login to remove this ad | Register Here