29-Aug-2016, 11:20 PM (This post was last modified: 29-Aug-2016, 11:21 PM by HamsterFPV.)
This frame is Lumenier's first sub 50g airframe with a total weight of only 45g. LOS and FPV are both options with this frame, the unique "saddle bag" mounting plates are used to attach components to the frame.
The frame is $59.99 and available to pre-order here.
Specification
The frame is $59.99 and available to pre-order here.
Specification
- 185mm frame (5inch propellers)
- 45g weight (Depending on configuration)
- Titanium screws
- 4Power PDB included
- Quick change arms
- Designed to fit 26mm cameras
- 1x QAV-ULX Ultra Light Racing Quadcopter
- 6x 4mm carbon fiber arm 5" (2 extra included)
- 4x 4mm carbon fiber arm braces
- 3x QAV-ULX Bottom Plate (1 extra included)
- 3x QAV-ULX "Saddle Bag" side racks
- 2x QAV-ULX FPV Top Plates (1 extra included)
- 2x QAV-ULX LOS Top Plates (1 extra included)
- 2x QAV-ULX G10 SMA Antenna holder (1 extra included)
- 1x Set of titanium screws and aluminum hardware
- 1x Lumenier 4Power Power distribution board + 5mm spacer / screw set
- 1x XT-60 Pig-Tail
- 1x Neoprene foam tape
- 1x Lumenier small lipo strap
- 10x Black plastic cable ties
Current quad: ZMR 250 / DYS SE2205 / Littlebee 20A ESCs / Drone Lab 1500 4S / Naze32 Rev5 / BF 2.7.1
FPV: Runcam Skyplus / Aomway 200mw VTX / Fatshark DomV1
>>>>>>>>>>Check Out My Build<<<<<<<<<<
FPV: Runcam Skyplus / Aomway 200mw VTX / Fatshark DomV1
>>>>>>>>>>Check Out My Build<<<<<<<<<<