Currently re-designing my Eachine Falcon 180 and decided to put headlights on it. I got me a double LED headlight from a newer Eachine (Falcon 250 pro) and now I'm wondering if I should put it on 5V or 12V. I'm guessing 5V (yellow LEDs being typically 2V per LED) but I'd rather not make any mistakes resulting in another 6 week wait for delivery. All I need is for it to light up. Nothing fancy other than that since my rearlight will handle that stuff.

This is the headlight:
http://www.banggood.com/Eachine-Falcon-2...73523.html

Any help is appreciated

it comes with a plug, is it not plug and play?

(08-Sep-2016, 01:42 AM)Oscar Wrote: it comes with a plug, is it not plug and play?

Its Eachine Costum yeah. A reversed JST-SH 2 pin female. Black wire goes to - but on the plug its connected to the + side. Nothing says anything about voltage at all so could be anything from 5 to 12 volts far as i know.

ask Banggood on product page they normally reply within 24 hours

(08-Sep-2016, 01:55 AM)Oscar Wrote: ask Banggood on product page they normally reply within 24 hours

Guess ill give it a shot

Well that was retarded quick response. For the record, its 5 Volts

(08-Sep-2016, 02:10 AM)Sacro Wrote: Guess ill give it a shot

Well that was retarded quick response. For the record, its 5 Volts

Yeah this guy on the banggood page also says it's 5v.