Cant get WS2812 Leds working on Betaflight. I tried many versions already, 2.8 and 2.6

As always, i did this:
- RX_Serial -> SBUS -> Port enable Serial RX....also tried RX_PPM -> SPEKTRUM1024
- enable LED_Strip

LED Tab:
wire 0-7 -> pic color -> save
On the latest Cleanflight i works.
LEDs are connected to CH5


I also tried betaflight release 2.5.4 and 2.5.3. also dont work

On one of my other quads i have 2.5.3 on a flip32 and it works with the same settings. So there must be something wrong with the naze32 rev 6

First of all LED won't work properly if your looptime is too low, i think 1000 is the bare minimum.

Have you had a read of Oscars great blog on this subject?

https://oscarliang.com/setup-rgb-led-cleanflight/