Posts: 99
Threads: 13
Likes Received: 24 in 15 posts
Likes Given: 33
Joined: Jul 2016
Reputation:
3 Got some time this morning before work for the maiden flight, default pids, rates not to my liking but so silky smooth. The runcam owl + cam was spot on too
• Posts: 391
Threads: 23
Likes Received: 50 in 41 posts
Likes Given: 56
Joined: Feb 2016
Reputation:
8 Nice build, I've always liked the QAV 210 frame.
Current quad: ZMR 250 / DYS SE2205 / Littlebee 20A ESCs / Drone Lab 1500 4S / Naze32 Rev5 / BF 2.7.1
FPV: Runcam Skyplus / Aomway 200mw VTX / Fatshark DomV1
>>>>>>>>>>
Check Out My Build<<<<<<<<<<
• Posts: 99
Threads: 13
Likes Received: 24 in 15 posts
Likes Given: 33
Joined: Jul 2016
Reputation:
3 It's my second qav Hamster, I really like the way it handles and the simplicity of the frame
• Posts: 918
Threads: 83
Likes Received: 533 in 271 posts
Likes Given: 498
Joined: Jan 2016
Reputation:
30 Very nice build there 2strokesmoke.
Posts: 99
Threads: 13
Likes Received: 24 in 15 posts
Likes Given: 33
Joined: Jul 2016
Reputation:
3 Out of the box, standard settings the owl + has a crisp clear picture, better than my hs1177. I had some issues with the supplied cable, but runcam support has been great and I have 2 replacement cables sn route
• Posts: 99
Threads: 13
Likes Received: 24 in 15 posts
Likes Given: 33
Joined: Jul 2016
Reputation:
3 Strange issues with my video today, there was noise from the tx interfering with video feed ? couldn't fly more than a few metres away before loosing picture completely ? My rx is sandwiched between the pdb and fc, and sits on top of the vtx power cables, vtx is underneath the top plate powered from the 5v filtered pdb supply ?
•