04-Apr-2016, 08:16 PM
I bought one of the first release Kiss FCs a while ago, it worked for a few flights then output 4 stopped working all together. In goes a replacement, all set up and hovers fine, it'll hover in one spot for an entire battery.....
However as soon as I start to roll hard left or right, ESC 2's output resets itself, causing the quad to death spiral. They are Littlebee 20A, it doesn't do a power reset, only the signal part of the start up tone sounds when this happens. Have I got myself another dud Kiss FC? I really couldn't be boned swapping it out and testing with a known, working board if it's a common issue.
I am using 1.02, Beta74 version firmware.
However as soon as I start to roll hard left or right, ESC 2's output resets itself, causing the quad to death spiral. They are Littlebee 20A, it doesn't do a power reset, only the signal part of the start up tone sounds when this happens. Have I got myself another dud Kiss FC? I really couldn't be boned swapping it out and testing with a known, working board if it's a common issue.
I am using 1.02, Beta74 version firmware.