Was getting ready to have some fun.
Before that I wanted to lower the min_throttle value because when doing flips it did small loops on the default settings it came in.
Changed that down.. Didn't run. Slowly moved it up untill I was back at the original value and then see the receiver is just not connected somehow.



https://gyazo.com/e2fe56e6bef8dcc7eacd8cd708b06591

TL: DR Changed Min_Throttle value. Put it back to normal, receiver not working.

Connecting battery and turning on transmitter gives me this:

https://gyazo.com/ef7d2e2af999cda068546a42f61b3bef

I set it to all the different receiver types. back to SBUS like 10 times. Tried to flash firmware, that failed, but reset everything again. Kept trying different things, setting it back. Eventually I got a signal from the transmitter. No idea what the problem was. Put the same settings it has now in over 10 times, but somehow, now it works..

At least it's working again!