18-Dec-2017, 02:50 AM (This post was last modified: 19-Dec-2017, 02:14 AM by buzzjob. Edit Reason: cleaned up )
IRX6 Multi Protocol Module With RTF Quads using the NRF24L01 protocol
do you have lots of RTF quads? yeah me too and too many tx's to keep track of with
battery swapping or they are just to dinky to use.
stop that noise..
anyway i made up this list from a old Devo database so i'd know what works with the module
check it out there are 200 or so using the NRF24L01 protocol.
https://docs.google.com/spreadsheets/d/1...edit#gid=0
module only works with Flysky FS-i6 or FS-i6x . not the FS-i6s
note that if you have FlyPlus firmware right stick commands to bind will not work.
no problems with stock Flysky FS-i6 or FS-i6x.
if you want the best mod firmware for your FS-i6 that makes your old 6ch
into a 10/14ch tx with about 30 alarms, timers and the ability to add an extra switch
SW_E or turn SWB into 3position switch . i think you can also add a vari switch instead of SWE.
flashing is easy but you need a data cable to do the deed. latest version 1.7.1
has altitude calculation using TGY-CAT01 on Flysky sensor/servo rx's
https://github.com/qba667/FlySkyI6/releases
there is also a support site .
https://www.rcgroups.com/forums/showthre...21/page187
iRX6 module about $8
https://www.banggood.com/IRangeX-iRX6-Mu...rehouse=CN
do you have lots of RTF quads? yeah me too and too many tx's to keep track of with
battery swapping or they are just to dinky to use.
stop that noise..
anyway i made up this list from a old Devo database so i'd know what works with the module
check it out there are 200 or so using the NRF24L01 protocol.
https://docs.google.com/spreadsheets/d/1...edit#gid=0
module only works with Flysky FS-i6 or FS-i6x . not the FS-i6s
note that if you have FlyPlus firmware right stick commands to bind will not work.
no problems with stock Flysky FS-i6 or FS-i6x.
if you want the best mod firmware for your FS-i6 that makes your old 6ch
into a 10/14ch tx with about 30 alarms, timers and the ability to add an extra switch
SW_E or turn SWB into 3position switch . i think you can also add a vari switch instead of SWE.
flashing is easy but you need a data cable to do the deed. latest version 1.7.1
has altitude calculation using TGY-CAT01 on Flysky sensor/servo rx's
https://github.com/qba667/FlySkyI6/releases
there is also a support site .
https://www.rcgroups.com/forums/showthre...21/page187
iRX6 module about $8
https://www.banggood.com/IRangeX-iRX6-Mu...rehouse=CN