Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Inductrix FPV Pro Video Channel Confusion
#1
I have a FPV Pro that I've only had about 2 weeks.
I also have the DJI RE goggles that I use with to fly it. I'm still pretty new at this.
The goggles can autoscan and find the the video which allows me to fly but I've noticed that the channel that was found varies by 2 -5 everytime I initiate auto-scan.
Playing around with the channel manualy in the goggles I can get a better picture if I tweak the channel.

What I want to do is determine what channel the quad's VTX is set to so that I can match up video RX to the TX.
But I can't seem to get the RX channel on the googles to agree with the channel that the TX is set to.
Anybody else played with this? I'm embedding a picture of the LED's. It should be channel 1 Band F according to the manual. -> 5740MHz
The goggles report 5860 - 5867 when I try autoscan several times. 

Steve


Attached Files Thumbnail(s)
   
Reply
Login to remove this ad | Register Here
#2
First, welcome to the best forum for all things FPV!

The first light (orange or red) is the channel light.  If it is on solid, you are on channel 1.  It would seem that for every push, the channel will go up and then you need to count the pulses to derive the channel.  The row of blue lights is your band.  F E A R B is their order, so the lights yours displays is channel 1 on F band, or 5740mHz.

I assume that it remembers whatever the VTX was last set at.  If you disconnect the power and plug it back in, the camera should flash its current setting.

[Image: adqppw6l.png]
SoCal Kaity :D
OMG, no one told me it would be this much fun!  Addicted :)
Reply
#3
Yes, it does. The Red LED and 1st blue LED is on. See attached jpeg.
I'm getting my frequency info from the chart that came with the inductrix and that's not matching what my goggles say the video is on.
I guess the only way to know which end is lying to me is to get a spectrum analyzer in the area and see where the video channel really is.
This is the only analog video channel I've tried to monitor so the problem can be either the drone or the goggles.
I've already ruled out user error  Whistling
Steve
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Help Meteor65 pro- motor runs away GhastBoi 7 196 08-Feb-2024, 12:15 AM
Last Post: Pathfinder075
  Help Cannot change video transmitter settings MerkD 12 308 28-Jan-2024, 09:52 AM
Last Post: MerkD
  Meteor 75 Pro dead, revive? husafreak 3 256 13-Jan-2024, 09:38 PM
Last Post: husafreak
  BetaFPV Meteor 65 Pro Cant transmit more than 25mw BarqsIsGood 2 356 03-Jan-2024, 03:04 AM
Last Post: Pathfinder075
  2S 75 Pro mstc 5 317 20-Dec-2023, 05:59 AM
Last Post: mstc


Login to remove this ad | Register Here