Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Inductrix
#1
I'm trying to connect my Inductrix Pro to my Taranis X9D plus and I have all the controls working except throttle, any suggestions?? Please anything ://
Reply
Login to remove this ad | Register Here
#2
are you using an Orange TX module in your Taranis? As far as I know the Inductrix doesn't support Frsky...

Anyway you could try to change channel assignment and swap the controls around, such as this:


This video is a bit old but the concept is the same.
Don't be a LOS'er, be an FPV'er :)  My Gear - Facebook - Instagram - Twitter
Reply
#3
(16-Jul-2017, 02:26 PM)Oscar Wrote: are you using an Orange TX module in your Taranis? As far as I know the Inductrix doesn't support Frsky...

Anyway you could try to change channel assignment and swap the controls around, such as this:


This video is a bit old but the concept is the same.
Yes I'm using the Orange module, I'll check the video out and see if it helps, thanks
Reply
#4
Did you manage to have a crack at BetaFlight? I hope you get in the air soon...
Windless fields and smokeless builds
Reply
#5
(17-Jul-2017, 04:32 AM)Tom BD Bad Wrote: Did you manage to have a crack at BetaFlight? I hope you get in the air soon...
I downloaded it but I couldn't figure out how to set it up for my Inductrix
Reply
#6
Are you able to get it connected? When you plug in the inductors and hit connect does it say failed or successful in the top left?
Reply
#7
(17-Jul-2017, 08:57 PM)Phoenix132 Wrote: Are you able to get it connected? When you plug in the inductors and hit connect does it say failed or successful in the top left?
It said failed
Reply
#8
I just had problems with drivers on my new laptop, 24 hours and 8 driver downloads later and finally got BF connected to my Tiny 7 (Also BNF version) {just arrived on Tues, review of which I hope to finish today...}  the configuration was 90% complete, but I did need to adjust 'throttle min' setting and confirm 'Arm' and 'Mode' channels...

The Impulse RC website has a driver fixer tool which is apparently great, my laptop threw a '.Net Framework' error even after I updated DotNet so it didn't work for me.

I can provide links to the 8 things I downloaded for my Win7 Pro (SP1), x64 Lenovo if you like..? 
TBH I can't say which was the fix that worked, because I'm stupid and forgot to restart the PC  till after applying multiple fixes, getting frustrated, sulking, pleading and finally shouting -
"Why won't you WORK you useless, piece of  Poop !!??"

Then my Mrs suggests I "Turn it off, and give the laptop a break for a little while" 
Oh yeah... "turn it off"
Doh
Windless fields and smokeless builds
Reply
#9
Like Tom says there's a good chance it's a driver issue. I had them when I started also and it was a huge pain. Make sure you have the right com port and baud rate selected. I thing baud rate is supposed to be 9600 but I could be wrong.

Hate to tell you this but if you don't connect to betaflight it's not getting off the ground.
[-] The following 1 user Likes Phoenix132's post:
  • Tom BD Bad
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Help Is anyone still flying the Inductrix Pro? master468 1 345 03-Feb-2022, 04:04 PM
Last Post: Rob3ddd
  PLEASE HELP: INDUCTRIX Spiinner 24 12,228 26-May-2018, 03:00 AM
Last Post: kaitylynn
  Inductrix FPV Pro Video Channel Confusion Dronenut 2 2,346 11-Feb-2018, 10:37 PM
Last Post: Dronenut
  Inductrix clone build - kaitylynn 22 3,406 09-Jul-2017, 02:54 PM
Last Post: kaitylynn
  Help Blade Inductrix TX bind with another Inductrix SkinnyShark 3 2,459 05-Feb-2017, 03:43 AM
Last Post: Jim


Login to remove this ad | Register Here