Using INAV Configurator 2.4 and setting up OSD on a Matek 722-Wing.

Everything on the screen in the OSD display of the OSD Tab appears great.

When it shows on my goggles or FPV screen in my shop, the last line drops off and a couple of things are one or two spaces off center.

I downloaded latest fonts and I made sure the OSD tab was set in the configuration.

Any idea why it's dropping the last line off?

Thanks.

It is pretty common that thing in BF that the BF OSD tab display is larger than what you actually see. So you just have to move things more into the center. In your case, move it one line up.

Okay cool.

Just wanted to make sure it wasn't a problem with something in the fonts or more likely something I was doing wrong with the fonts.

I'll give it a try.

Thanks.