Flashed my drone to Inav 4.1 Was previously using beta flight I have OSD information in my DJI goggles but I cannot seem to get a heading indicator or compass azimuth or anything related to direction other than return to home. Position hold return to home functions are working perfectly I'm really enjoying it however I would like to have the compass indicator is there anyway that I can get that into my goggles I was your appreciate your help i have a mumba 405

Unfortunately those elements are not supported by the DJI OSD.

https://oscarliang.com/dji-fpv-system-setup/

(08-Mar-2022, 05:21 PM)V-22 Wrote: Unfortunately those elements are not supported by the DJI OSD.

https://oscarliang.com/dji-fpv-system-setup/

Thank you so much for your reply. I am just wondering why dji will allow this in beta flight but not inav. Im sure they have a good reason. I was hoping for some type of work around.

(08-Mar-2022, 07:49 PM)Dbwbroker Wrote: Thank you so much for your reply. I am just wondering why dji will allow this in beta flight but not inav. Im sure they have a good reason. I was hoping for some type of work around.

It's not supported in Betaflight either.

You are correct I'm sorry For the miss information it was my analog drone with analog goggles that I saw the heading. Hoping for a workaround someday soon

DJI have now abandoned any further development of the standalone DJI FPV System, so what features (and bugs) we have now is what we are stuck with forever unfortunately. The HDZero HD system on the other hand does support ALL Betaflight and INAV OSD elements via the MSP DisplayPort interface which is something that DJI should really have done, but they never did before giving up on the system.

Thank you very much for the update

So I hear root has been achieved on the DJI v1 and v2 goggles and full OSD support will be coming through that, if you are feeling adventurous. 
Still not released, but they claim it's absolutely possible and on its way. Same people that released the video out for the goggles.

(06-Jun-2022, 10:46 PM)Rykker Wrote: So I hear root has been achieved on the DJI v1 and v2 and full OSD support will be coming through that, if you are feeling adventurous. 
Still not released, but they claim it's absolutely possible and coming.

Yes, it's looking likely that we are going to get a lot of goodies with the root exploit. All details regarding the DJI FPV System root exploit are discussed in the following thread...

https://intofpv.com/t-community-firmware...fpv-system

And there is an interview with the fpv.wtf developers who found the root exploit and what else will be coming in the thread link below...

https://intofpv.com/t-fpv-wtf-project-de...-interview