If you enjoy our forum, why not join us? :) Login removes all the ads too! Click here to register in a few simple steps

Login to remove this ad | Register Here
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
How to see the text on the chips of a flight controller
It's handy to know what MCU or IMU you have on your flight controller (F1, F3, F4, F7, MPU6000, MPU6500 etc...)
But sometimes it's hard to see. The solution is to put a piece of scotch tape on top of it like this

Source: 1davide on Reddit
Don't be a LOS'er, be an FPV'er :) -- Blog - Facebook - Instagram - Twitter - Google Plus
[-] The following 5 users Like Oscar's post:
  • E.L.K., McDee, Snuffypot11, sloscotty, KonradS
Now that is a good idea, easier and faster than a jewelers loupe. Cool that you cited the source too!
Flying: Talon SVX 220 Hypebuild! & WATERPROOF Martian 3, 5" Motors: Hyperlite 2205 2522Kv FC: DYS F4 Pro (BF Omnibus F4 3.2.0) ESC: Speedix ES20 Lite (potted in 2 part epoxy) VTx: Tramp HV (conformal coated) Rx: Crossfire micro V2 (conformal coated) Camera: Runcam Eagle 2 


I use phone camera with flash on on slight angle works well
some times requires to make is slightly wet by finger but works well

see attached

[-] The following 1 user Likes Darozas's post:
  • Oscar
Login to remove this ad | Register Here