If you enjoy our forum, why not join us? :) Login removes all the ads too! Click here to register in a few simple steps

Login to remove this ad | Register Here
Poll: no poll
This poll is closed.
0 0%
0 0%
Total 0 vote(s) 0%
* You voted for this item. [Show Results]

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
House-Moving Giveaway
Can't take all the stuff with me with the move, so decided to give away to forum members, hope they help somebody out!
They are all free, you just need to pay for postage.

I have divided the parts into 14 piles here, you can request 1 or multiple piles if you want. It costs about $10 to ship a small parcel, as long as we can fit all the stuff in the box, shipping stays the same ($10) regardless how many piles.

How to request? I will update tomorrow, for now just have a look what you need, and get ready to apply tomorrow (12th Nov). Please also vote in the poll so i can get an idea on item popularity.
Please PM me with the number you want, and I will reply.

Let me know in the replies if you have any questions (avoid PM)

Disclaimer: Don't ask me if something is working Smile I wouldn't know as I didn't test them before shipping (simply takes too long to do). Although I am pretty sure most of them do work, otherwise I would have thrown them away Smile

1.      Speed Addict 250 - Detail: https://oscarliang.com/build-log-speed-a...mini-quad/  (Taken)

Quote:a.      Frame (Spare arms for 280 quad, Hexa config) – in great condition
b.     PZ0420 Camera
c.      TS832 VTX
d.     SimpleOSD
e.     PDB
f.      5V/12V step down voltage regulator + LC Filter
g.     2xLED bars

2.      Airhog 180 (BNF) - Detail: https://oscarliang.com/airhog-180-build-log/ (gone)

Quote:a.      Frame (covered in dust and dried mud) – but in good condition just need a bit cleaning
b.     Naze32 Rev5 FC
c.      DemonCore PDB
d.     Runcam Sky Plus Camera
e.     Micro MinimOSD
f.       4x Dragonfly 2206 2800KV motors (one motor has stripped thread, I managed to continue flying with it by fixing props using zip ties as shown in picture)
g.      4x littlebee 20A ESC’s
h.     2x LED bar
i.        D4R-II RX
j.       FX796T VTX

3.      XElites 180 (BNF? Not tested) https://oscarliang.com/xe180-quadcopter-build/ (gone)

Quote:a.      Frame – the front 3D printed part is broken but held together with zip tie and still holding, I will put a spare part for that you can replace yourself. Apart from that frame is in good condition
b.     Naze32 Rev5 FC
c.      D4R-II RX
d.     PDB
e.     5V/12V step down voltage regulator + LC Filter
f.       TS5823 VTX
g.      Sony SuperHAD 650TVL Camera
h.     4x Blue Series 12A ESC 
i.        4x Sunnysky 1306 3100KV motors (one motor missing a prop nut – M4, can be easily and cheaply found on ebay)

4.      ZMR250 V2 (BNF – no RX) https://oscarliang.com/zmr250-v2-frame-review/ (gone)

Quote:a.      Frame – with upgraded “unbreakable” 5mm arms, with FPVModel ZMR V2 PDB
b.     7x MC2206 2000KV Motors (3 spare)
c.      4x DYS SN20A ESC
d.     Naze32 Rev5 FC
e.     PZ0420 camera
f.       ImmersionRC 600mW VTX
g.      12V step down voltage regulator + LC Filter
h.     MiminOSD
i.        A set of 10 degree motor mounts


5.      Arris X-Speed 250 https://oscarliang.com/build-log-arris-x-speed-250-mini-quad/ (taken)[/url]

Quote:a.      Frame – Assembled, front right standoff is bent slightly, but in working condition
b.     4x Blue series 12A ESC

6.      Motors / ESCs Combo (taken)

Quote:a.      5 x Cobra 2204 1960KV motors 
b.     7x Blueseries 12A ESC’s (not sure what firmware, make sure you know how to flash them)
c.      1x new motor Bearing kit
d.     3x new replacement motor bells with prop adapters

7.      Pile (taken)

Quote:a.      BrainFPV F4 FC (first gen)
b.     4x Turnigy 1811 2900kv motors
c.      4x turnigy plush 6A ESC
d.     4x Cobra 2204 1960KV motors
e.     3x DYS BL20A ESC
f.       LC Filter
g.      2S Battery level indicator

8.  Pile (gone)

Quote:a.      4x Cobra 2204 1960KV motors
b.     4x Rotorgeek 20A ESC
c.      MegaPirate FC
d.     Neo 6M GPS sensor
e.     Flathead electroluminescent Lighting kit https://oscarliang.com/flathat-drone-pads-lighting-kit/
f.       4x Arris 12A SimonK ESC (brand new)
g.      LC Filter

9.      Pile (Taken)

Quote:a.      4x Castle quadpack 25A ESC’s (one with BEC, 3 without, brand new)
b.     XRacer FC (used, buzzer pads ripped)
c.      LC Filter

10.  Pile

Quote:a.      4x Castle DMR 30A ESC’s (no BEC, brand new)
b.     Naze32 Rev5 ESC

11.  Pile (taken)

Quote:a.      Quanum Elite 25mW VTX
b.     Naze32 Rev6
c.      4x Afro 20A ESC (brand new)

12.  Micro Quad stuff (Taken)

Quote:a.      CJMCU 7mm micro quad
b.     SRP8 RX (brand new, but missing cable)
c.      DIY micro VTX with 1g camera (working)
d.     Various triblade props
e.     Hobbyking Wisp micro frame (missing a few screws)
f.       2 sets of 4pcs 75mm props with 8.5x20 motors ([url=http://www.banggood.com/Eachine-75mm-Blade-Propeller-Prop-8Pcs-8_5x20mm-Coreless-Motor-4Pcs-for-DIY-Micro-Quadcopter-Frame-p-1053859.html]http://www.banggood.com/Eachine-75mm-Blade-Propeller-Prop-8Pcs-8_5x20mm-Coreless-Motor-4Pcs-for-DIY-Micro-Quadcopter-Frame-p-1053859.html)

13.  ZMR Frame Pack (gone)

Quote:a.      Frame
b.     10 spare arms
c.      2 spare bottom plates
d.     2 ZMR PDB (Diaton & OSO)
e.     Spare standoffs
f.       5x 1806 2280KV motors (1 spare)
g.      4x Blue Series 12A ESC
h.     Quanum Elite 200mW VTX (vertical connector)

14.  Foldable Frame https://oscarliang.com/porta-quad-zippy-...uadcopter/

Don't be a LOS'er, be a FPV'er :) -- My Fleet
Piles 2 and 3 looks sleek, awaiting for further details Smile
All the best
Grzesiek (Grisha/ Greg)

Curently flyable: Nox 5, Nox 3, Minimalist 112, Scrap at the moment... nothing is flyable
Bench / in progres: fixing Nox 5, Nox 3, Minimalist 112, Scrap
thinking about building: 450

where are you moving to?
Login to remove this ad | Register Here
(12-Nov-2016, 02:15 AM)JimmyLe813 Wrote: where are you moving to?

off topics Smile another country, for a few months.
Don't be a LOS'er, be a FPV'er :) -- My Fleet
ZMR 250 and Airhog 180 look wicked! I also like the dust and dried mud, that 180 would feel properly at home here on the farm!

Edit to ask Oscar, do you have an old TX that you have upgraded from that you might be willing to part with? additional edit to confirm I am willing to pay for it!
13 looks good as a "hobby assimilation tool". Resistance is futile lol
Find me on Youtube and Instagram. I currently fly: NOX5, NOX5RAirblade Assault 130 and drive a scrap RC car
Login to remove this ad | Register Here
If nobody has expressed an interest in 'pile 12' with the micro stuff, I'd love those bits too..?
Stuff are going fast, only 5, 8, 10, 11, 14 left Smile
Don't be a LOS'er, be a FPV'er :) -- My Fleet
I voted for 11 Big Grin
Login to remove this ad | Register Here
(13-Nov-2016, 12:56 PM)sloscotty Wrote: I voted for 11 Big Grin

drop me a PM Scotty Smile
Don't be a LOS'er, be a FPV'er :) -- My Fleet
I noticed your poll is closed...I assume number 8 is spoken for?
"Damn the torpedoes!!!  Full speed ahead!!!"
(13-Nov-2016, 02:22 PM)sirdude Wrote: I noticed your poll is closed...I assume number 8 is spoken for?

sorry there is no poll, simply PM me the number you want Smile
yes number 8 is available.
Don't be a LOS'er, be a FPV'er :) -- My Fleet
Login to remove this ad | Register Here
I am so happy I can help Smile 5, 10, 14 are still available Smile
I will also throw some IntoFPV lipo straps in these parcels Smile
Don't be a LOS'er, be a FPV'er :) -- My Fleet

Possibly Related Threads...
Thread Author Replies Views Last Post
  Ended Forum Anniversary Giveaway intoFPV 4 225 27-Feb-2017, 04:29 PM
Last Post: Drone0fPrey
  Announcement How To Host a Giveaway Oscar 0 280 03-Sep-2016, 01:15 PM
Last Post: Oscar
  Announcement Why I can't reply to giveaway thread? Oscar 0 377 07-Aug-2016, 01:35 AM
Last Post: Oscar
  Ended [GIVEAWAY] Set of 5 Dragonfly 2800kV motors. BigglesFPV 44 2,753 19-May-2016, 03:51 PM
Last Post: riquezjp