Posts: 78
Threads: 14
Likes Received: 13 in 9 posts
Likes Given: 1
Joined: Nov 2016
Reputation:
0 Does anyone know if it's possible to revert a HK BLue 12A ESC to the stock firmware? I have some which I originally flashed with BLHeli for multi-rotor use. Now I want to use one in a flying wing and it seems like it would make more sense to revert to the original firmware so I can get the original voltage cutoff settings etc back.
I couldn't seem to find the original firmware anywhere so that I can re-flash back to that. Does anyone know if it's available somewhere?
• Posts: 5,315
Threads: 672
Likes Received: 3,155 in 1,743 posts
Likes Given: 2,030
Joined: Jan 2016
Reputation:
139 I don't think that's possible unless you have the stock firmware file... which seems to be to be an impossibility. once you flash a different firmware the original is erased.
• Posts: 2,286
Threads: 38
Likes Received: 1,527 in 995 posts
Likes Given: 1,881
Joined: Apr 2016
Reputation:
72 Unfortunately, most ESCs have the internal flash protection bits set so that you can't read out the original firmware.
• Posts: 2,286
Threads: 38
Likes Received: 1,527 in 995 posts
Likes Given: 1,881
Joined: Apr 2016
Reputation:
72 I buy HobbyWing FlyFun ESCs for my fixed wing stuff. They don't cost lots of money and neither does the programming card.
• Posts: 78
Threads: 14
Likes Received: 13 in 9 posts
Likes Given: 1
Joined: Nov 2016
Reputation:
0 It's not about the cost, I just don't like the idea of the natural resources that went in to them being wasted.
•