23-Dec-2016, 07:40 PM (This post was last modified: 23-Dec-2016, 09:45 PM by thepolicepublic.)
I tried flashing my x-racer f303 flight controller with BetaFlight, went through all the steps. It said that it successfully flashed the firmware, but when I unplugged the board it would not exit bootloader mode and now can't connect to any configurator.
*update: Flashed board with wrong firmware, intended firmware is the x_racerspi if you have the 3.1 variant board. I recommend checking your board variant before flashing or you'll end up stressed like me.
*update: Flashed board with wrong firmware, intended firmware is the x_racerspi if you have the 3.1 variant board. I recommend checking your board variant before flashing or you'll end up stressed like me.