If you enjoy our forum, why not join us? :) Login removes all the ads too! Click here to register in a few simple steps

Login to remove this ad | Register Here
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Hello, Micro flight
#1
Wink 
Hi guys, saying HELLO! to this fabulous idea of Oscar.

Sharing the only video that I have, Micro printed frame. Don't have brushless acro videos, but it will come in 2016 + FPV, cheers!



Big Grin
#2
Welcome Daprato!!! Big Grin your video has been embeded beautifully!!!
Don't be a LOS'er, be a FPV'er :) -- My Fleet
Reply
#3
Wow, looks nice ...
How much does a whole micro quad cost?
I consider building one for bad weather indoor flight, without fpv!
Sky is where the fun begins!
Flying: Armattan F1-6 / Cobra 1960kv / KISS / 1800mAh nano's / SPR3 / Betaflight 2kHz
Building: FPV49v4 modified
Reply
Login to remove this ad | Register Here
#4
(13-Jan-2016, 12:22 PM)DiegoTheWolf Wrote: Wow, looks nice ...
How much does a whole micro quad cost?
I consider building one for bad weather indoor flight, without fpv!

have you seen my micro quad parts list?
I would say between $100-$150 probably?

http://blog.oscarliang.net/brushed-micro...arts-list/
Don't be a LOS'er, be a FPV'er :) -- My Fleet
Reply
#5
(13-Jan-2016, 08:24 PM)Oscar Liang Wrote: have you seen my micro quad parts list?
I would say between $100-$150 probably?

http://blog.oscarliang.net/brushed-micro...arts-list/

Thank you. Had a look at it recently but it's another big topic.
I like that CJMCU board.... but it's nowhere to get.

Saw your video flying FPV-indoor, that was sooo great. And since it's raining here all day long and i can't fly my 250 beast indoors.... i ned one too xD

Always thought they were lame ... ^^
Sky is where the fun begins!
Flying: Armattan F1-6 / Cobra 1960kv / KISS / 1800mAh nano's / SPR3 / Betaflight 2kHz
Building: FPV49v4 modified
Reply
#6
(13-Jan-2016, 08:46 PM)DiegoTheWolf Wrote:
(13-Jan-2016, 08:24 PM)Oscar Liang Wrote: have you seen my micro quad parts list?
I would say between $100-$150 probably?

http://blog.oscarliang.net/brushed-micro...arts-list/

Thank you. Had a look at it recently but it's another big topic.
I like that CJMCU board.... but it's nowhere to get.

Saw your video flying FPV-indoor, that was sooo great. And since it's raining here all day long and i can't fly my 250 beast indoors.... i ned one too xD

Always thought they were lame ... ^^

Since I tried the 8.5mm motor setup, I cannot recommend it enough!! I will not look back at another 7mm setup again... :Big Grin

go for 8.5mm setup I swear you will enjoy it more Big Grin
Don't be a LOS'er, be a FPV'er :) -- My Fleet
Reply
Login to remove this ad | Register Here
#7
(13-Jan-2016, 12:22 PM)DiegoTheWolf Wrote: Wow, looks nice ...
How much does a whole micro quad cost?
I consider building one for bad weather indoor flight, without fpv!

Printed frame is good for fun, creating, but stronger plastic will be too heavy and lighter plastic one will break, if you manage to fly "stunty" if I can say so. I would suggest to buy my favorite one from picnicquads, polycarbonate efficiency II. Polycarbonate when thin arms like that will break LESS than the cf-birchcore. Polycarbonate could bend, so it's a 7$ well invested when you're trying to learn acro, stunty stuff. But, if you're confortable and experienced, nothing beat it's cf-birchcore in therm of lightweight. 

My setup cost : ~78$
- Efficiency II frame 120 : 7$ (frame without motor mount)
- 4 motor mount at 0.85$ each
- a flight controller : ~40-50$
- set of 4 motor 0820-17 (8.5mm brush motors) : 15$ to 31$ for a set
- lipo 1s around 500 to 600 mAh 35C : there's the nano-tech actually lower price 3$



some links:
http://picnicquads.com/
http://micro-motor-warehouse.com/
http://www.hobbyking.com/hobbyking/store...20SR_.html

Forget to mention the Lemon Satellite DMS2 receiver for 10 to 15$
But Picnicquads sell SciSky apparently with receiver integrated, started at 40$

Reply
#8
(13-Jan-2016, 08:59 PM)Oscar Wrote: Since I tried the 8.5mm motor setup, I cannot recommend it enough!! I will not look back at another 7mm setup again... :Big Grin

go for 8.5mm setup I swear you will enjoy it more Big Grin

Hi Oscar,

Please correct me if I'm wrong.. have you tried 8.5 mm motors with CJMCU board  Huh
Reply
#9
(20-Aug-2016, 01:55 PM)pakamon Wrote: Hi Oscar,

Please correct me if I'm wrong.. have you tried 8.5 mm motors with CJMCU board  Huh

no i haven't.
Don't be a LOS'er, be a FPV'er :) -- My Fleet
Reply
Login to remove this ad | Register Here
#10
I really need to pick up a micro quad for indoor flying over the winter.
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Discussion Running RaceFlight on F3 flight controller? TomP7715 1 128 23-Mar-2017, 12:29 AM
Last Post: JPFlorida
  Help Lux V2 recalibrates during flight RocketSquid 5 159 14-Mar-2017, 01:58 AM
Last Post: unseen
  First Flight Story: Dead Bat! Carl.Vegas 4 200 10-Mar-2017, 09:43 PM
Last Post: Carl.Vegas
  Help 1st flight....well sort of........ DannyZ 8 348 12-Jan-2017, 03:16 PM
Last Post: DannyZ
  3D flight & Flight Distance khan296 1 268 02-Sep-2016, 07:38 PM
Last Post: HamsterFPV