Posts: 7 Threads: 2 Likes Received: 1 in 1 posts Likes Given: 0 Joined: Jun 2017 Reputation: 0 Hello All, I'm a total noob, and may need some help about things I can't sort out myselft. Built my first quad, and now trying to improve my skills. Turningy 9x with er9x and XJT, with telemetry mod. X4R-SB on my reallac x210, Emax 2205RS 2600kv Racerstar RS30A V2 30A Blheli_S First problems, my eachine vtx03 worked only on the first test, and didn't light up after for no reason. Now my CW motors are really hot and the two other are not so hot. Don't know what to do ? Thanks for helping me  Posts: 2,410 Threads: 136 Likes Received: 1,790 in 1,052 posts Likes Given: 3,302 Joined: Jan 2017 Reputation: 50 How was the TX03 powered? Did the antenna come off at while it was powered on? As this will usually causes failures. What flight controller/firmware are you using? A Blackbox log would be helpful to diagnose motor temp issues. Have you calibrated ESCs? Ect ect. Walk us through your experience so far. Be as specific as possible and pictures say a thousand words  Our pros here are better able to assist if they know every little detail. ![[-]](https://intofpv.com/images/collapse.png) • Posts: 7 Threads: 2 Likes Received: 1 in 1 posts Likes Given: 0 Joined: Jun 2017 Reputation: 0 (13-Jun-2017, 04:05 PM)Drone0fPrey Wrote: How was the TX03 powered? Did the antenna come off at while it was powered on? As this will usually causes failures.
What flight controller/firmware are you using? A Blackbox log would be helpful to diagnose motor temp issues.
Have you calibrated ESCs? Ect ect.
Walk us through your experience so far. Be as specific as possible and pictures say a thousand words
Our pros here are better able to assist if they know every little detail. Here are some details : Capture from my betaflight blackbox : http://imgur.com/a/JRAro And here is my betaflight dump : https://pastebin.com/XxcZ6EDv And attached is my blackbox log, 1 flight so maybe nothing to see  , I'm not able to do crazy stuffs, and flying LOS waiting for a vtx. Can't attach too big, were can I upload ? VTX was connected on +5v on the same pads as the FC on my pdb. antenna always connected. Do you think it will be more secure to connect it to the FC ? Esc were calibrated using the betaflight process, will do another one. Reversed 2 esc for CCW to avoid crossing wires using BL HELI SUITE Followed this video : • Posts: 1,504 Threads: 83 Likes Received: 944 in 654 posts Likes Given: 2,142 Joined: Sep 2016 Reputation: 24 Just a quick welcome Alexplose, sorry I can't offer any help, but I am sure someone will be along soon... Windless fields and smokeless builds • Posts: 2,410 Threads: 136 Likes Received: 1,790 in 1,052 posts Likes Given: 3,302 Joined: Jan 2017 Reputation: 50 How to upload pics Also there is a code button on the toolbar when writing a new post that will include it within your text. Or type, (code) paste your dump/diff (/code) *replacing "( )" with "[ ]" Code: will look like this
I forgot to say welcome by the way!   my apologies Welcome to thee place for FPV  Posts: 2,410 Threads: 136 Likes Received: 1,790 in 1,052 posts Likes Given: 3,302 Joined: Jan 2017 Reputation: 50 (13-Jun-2017, 04:20 PM)Alexplose Wrote: Here are some details :
Capture from my betaflight blackbox : http://imgur.com/a/JRAro
And here is my betaflight dump : https://pastebin.com/XxcZ6EDv
And attached is my blackbox log, 1 flight so maybe nothing to see , I'm not able to do crazy stuffs, and flying LOS waiting for a vtx.
Can't attach too big, were can I upload ?
VTX was connected on +5v on the same pads as the FC on my pdb. antenna always connected.
Do you think it will be more secure to connect it to the FC ?
Esc were calibrated using the betaflight process, will do another one.
Reversed 2 esc for CCW to avoid crossing wires using BL HELI SUITE Took the liberty of posting these for you ![[Image: oMzMQjdl.jpg]](http://i.imgur.com/oMzMQjdl.jpg) ![[Image: J730Tc2l.jpg]](http://i.imgur.com/J730Tc2l.jpg) Code:
[list=1]
[*][color=#333333] [/color]
[*][color=#333333]CLI[/color]
[*][color=#333333] [/color]
[*][color=#333333]# dump[/color]
[*][color=#333333]# Betaflight / SPRACINGF3 3.1.7 Apr 3 2017 / 22:27:23 (e1c4b5c)[/color]
[*][color=#333333]name -[/color]
[*][color=#333333]resource BEEPER 1 C15[/color]
[*][color=#333333]resource MOTOR 1 A06[/color]
[*][color=#333333]resource MOTOR 2 A07[/color]
[*][color=#333333]resource MOTOR 3 A11[/color]
[*][color=#333333]resource MOTOR 4 A12[/color]
[*][color=#333333]resource MOTOR 5 B08[/color]
[*][color=#333333]resource MOTOR 6 B09[/color]
[*][color=#333333]resource MOTOR 7 A02[/color]
[*][color=#333333]resource MOTOR 8 A03[/color]
[*][color=#333333]resource MOTOR 9 NONE[/color]
[*][color=#333333]resource MOTOR 10 NONE[/color]
[*][color=#333333]resource MOTOR 11 NONE[/color]
[*][color=#333333]resource MOTOR 12 NONE[/color]
[*][color=#333333]resource SERVO 1 NONE[/color]
[*][color=#333333]resource SERVO 2 NONE[/color]
[*][color=#333333]resource SERVO 3 NONE[/color]
[*][color=#333333]resource SERVO 4 NONE[/color]
[*][color=#333333]resource SERVO 5 NONE[/color]
[*][color=#333333]resource SERVO 6 NONE[/color]
[*][color=#333333]resource SERVO 7 NONE[/color]
[*][color=#333333]resource SERVO 8 NONE[/color]
[*][color=#333333]resource PPM 1 A00[/color]
[*][color=#333333]resource PWM 1 A00[/color]
[*][color=#333333]resource PWM 2 A01[/color]
[*][color=#333333]resource PWM 3 B11[/color]
[*][color=#333333]resource PWM 4 B10[/color]
[*][color=#333333]resource PWM 5 B04[/color]
[*][color=#333333]resource PWM 6 B05[/color]
[*][color=#333333]resource PWM 7 B00[/color]
[*][color=#333333]resource PWM 8 B01[/color]
[*][color=#333333]resource LED_STRIP 1 A08[/color]
[*][color=#333333]resource SERIAL_TX 1 A09[/color]
[*][color=#333333]resource SERIAL_TX 2 A14[/color]
[*][color=#333333]resource SERIAL_TX 3 B10[/color]
[*][color=#333333]resource SERIAL_TX 4 NONE[/color]
[*][color=#333333]resource SERIAL_TX 5 NONE[/color]
[*][color=#333333]resource SERIAL_TX 6 NONE[/color]
[*][color=#333333]resource SERIAL_TX 7 NONE[/color]
[*][color=#333333]resource SERIAL_TX 8 NONE[/color]
[*][color=#333333]resource SERIAL_TX 9 NONE[/color]
[*][color=#333333]resource SERIAL_TX 10 NONE[/color]
[*][color=#333333]resource SERIAL_TX 11 B05[/color]
[*][color=#333333]resource SERIAL_TX 12 B01[/color]
[*][color=#333333]resource SERIAL_RX 1 A10[/color]
[*][color=#333333]resource SERIAL_RX 2 A15[/color]
[*][color=#333333]resource SERIAL_RX 3 B11[/color]
[*][color=#333333]resource SERIAL_RX 4 NONE[/color]
[*][color=#333333]resource SERIAL_RX 5 NONE[/color]
[*][color=#333333]resource SERIAL_RX 6 NONE[/color]
[*][color=#333333]resource SERIAL_RX 7 NONE[/color]
[*][color=#333333]resource SERIAL_RX 8 NONE[/color]
[*][color=#333333]resource SERIAL_RX 9 NONE[/color]
[*][color=#333333]resource SERIAL_RX 10 NONE[/color]
[*][color=#333333]resource SERIAL_RX 11 B04[/color]
[*][color=#333333]resource SERIAL_RX 12 B00[/color]
[*][color=#333333]mixer QUADX[/color]
[*][color=#333333] [/color]
[*][color=#333333]mmix reset[/color]
[*][color=#333333] [/color]
[*][color=#333333]servo 0 1000 2000 1500 90 90 100 -1[/color]
[*][color=#333333]servo 1 1000 2000 1500 90 90 100 -1[/color]
[*][color=#333333]servo 2 1000 2000 1500 90 90 100 -1[/color]
[*][color=#333333]servo 3 1000 2000 1500 90 90 100 -1[/color]
[*][color=#333333]servo 4 1000 2000 1500 90 90 100 -1[/color]
[*][color=#333333]servo 5 1000 2000 1500 90 90 100 -1[/color]
[*][color=#333333]servo 6 1000 2000 1500 90 90 100 -1[/color]
[*][color=#333333]servo 7 1000 2000 1500 90 90 100 -1[/color]
[*][color=#333333]smix reset[/color]
[*][color=#333333] [/color]
[*][color=#333333] [/color]
[*][color=#333333]feature -RX_PPM[/color]
[*][color=#333333]feature -VBAT[/color]
[*][color=#333333]feature -INFLIGHT_ACC_CAL[/color]
[*][color=#333333]feature -RX_SERIAL[/color]
[*][color=#333333]feature -MOTOR_STOP[/color]
[*][color=#333333]feature -SERVO_TILT[/color]
[*][color=#333333]feature -SOFTSERIAL[/color]
[*][color=#333333]feature -GPS[/color]
[*][color=#333333]feature -FAILSAFE[/color]
[*][color=#333333]feature -SONAR[/color]
[*][color=#333333]feature -TELEMETRY[/color]
[*][color=#333333]feature -CURRENT_METER[/color]
[*][color=#333333]feature -3D[/color]
[*][color=#333333]feature -RX_PARALLEL_PWM[/color]
[*][color=#333333]feature -RX_MSP[/color]
[*][color=#333333]feature -RSSI_ADC[/color]
[*][color=#333333]feature -LED_STRIP[/color]
[*][color=#333333]feature -DISPLAY[/color]
[*][color=#333333]feature -OSD[/color]
[*][color=#333333]feature -BLACKBOX[/color]
[*][color=#333333]feature -CHANNEL_FORWARDING[/color]
[*][color=#333333]feature -TRANSPONDER[/color]
[*][color=#333333]feature -AIRMODE[/color]
[*][color=#333333]feature -SDCARD[/color]
[*][color=#333333]feature -VTX[/color]
[*][color=#333333]feature -RX_SPI[/color]
[*][color=#333333]feature -SOFTSPI[/color]
[*][color=#333333]feature -ESC_SENSOR[/color]
[*][color=#333333]feature -FEATURE_ANTI_GRAVITY[/color]
[*][color=#333333]feature VBAT[/color]
[*][color=#333333]feature RX_SERIAL[/color]
[*][color=#333333]feature FAILSAFE[/color]
[*][color=#333333]feature TELEMETRY[/color]
[*][color=#333333]feature CURRENT_METER[/color]
[*][color=#333333]feature RSSI_ADC[/color]
[*][color=#333333]feature BLACKBOX[/color]
[*][color=#333333]beeper GYRO_CALIBRATED[/color]
[*][color=#333333]beeper RX_LOST[/color]
[*][color=#333333]beeper RX_LOST_LANDING[/color]
[*][color=#333333]beeper DISARMING[/color]
[*][color=#333333]beeper ARMING[/color]
[*][color=#333333]beeper ARMING_GPS_FIX[/color]
[*][color=#333333]beeper BAT_CRIT_LOW[/color]
[*][color=#333333]beeper BAT_LOW[/color]
[*][color=#333333]beeper GPS_STATUS[/color]
[*][color=#333333]beeper RX_SET[/color]
[*][color=#333333]beeper ACC_CALIBRATION[/color]
[*][color=#333333]beeper ACC_CALIBRATION_FAIL[/color]
[*][color=#333333]beeper READY_BEEP[/color]
[*][color=#333333]beeper MULTI_BEEPS[/color]
[*][color=#333333]beeper DISARM_REPEAT[/color]
[*][color=#333333]beeper ARMED[/color]
[*][color=#333333]beeper SYSTEM_INIT[/color]
[*][color=#333333]beeper ON_USB[/color]
[*][color=#333333]map AETR1234[/color]
[*][color=#333333]serial 0 1 115200 57600 0 115200[/color]
[*][color=#333333]serial 1 32 115200 57600 0 115200[/color]
[*][color=#333333]serial 2 64 115200 57600 0 115200[/color]
[*][color=#333333]led 0 0,0::C:0[/color]
[*][color=#333333]led 1 0,0::C:0[/color]
[*][color=#333333]led 2 0,0::C:0[/color]
[*][color=#333333]led 3 0,0::C:0[/color]
[*][color=#333333]led 4 0,0::C:0[/color]
[*][color=#333333]led 5 0,0::C:0[/color]
[*][color=#333333]led 6 0,0::C:0[/color]
[*][color=#333333]led 7 0,0::C:0[/color]
[*][color=#333333]led 8 0,0::C:0[/color]
[*][color=#333333]led 9 0,0::C:0[/color]
[*][color=#333333]led 10 0,0::C:0[/color]
[*][color=#333333]led 11 0,0::C:0[/color]
[*][color=#333333]led 12 0,0::C:0[/color]
[*][color=#333333]led 13 0,0::C:0[/color]
[*][color=#333333]led 14 0,0::C:0[/color]
[*][color=#333333]led 15 0,0::C:0[/color]
[*][color=#333333]led 16 0,0::C:0[/color]
[*][color=#333333]led 17 0,0::C:0[/color]
[*][color=#333333]led 18 0,0::C:0[/color]
[*][color=#333333]led 19 0,0::C:0[/color]
[*][color=#333333]led 20 0,0::C:0[/color]
[*][color=#333333]led 21 0,0::C:0[/color]
[*][color=#333333]led 22 0,0::C:0[/color]
[*][color=#333333]led 23 0,0::C:0[/color]
[*][color=#333333]led 24 0,0::C:0[/color]
[*][color=#333333]led 25 0,0::C:0[/color]
[*][color=#333333]led 26 0,0::C:0[/color]
[*][color=#333333]led 27 0,0::C:0[/color]
[*][color=#333333]led 28 0,0::C:0[/color]
[*][color=#333333]led 29 0,0::C:0[/color]
[*][color=#333333]led 30 0,0::C:0[/color]
[*][color=#333333]led 31 0,0::C:0[/color]
[*][color=#333333]color 0 0,0,0[/color]
[*][color=#333333]color 1 0,255,255[/color]
[*][color=#333333]color 2 0,0,255[/color]
[*][color=#333333]color 3 30,0,255[/color]
[*][color=#333333]color 4 60,0,255[/color]
[*][color=#333333]color 5 90,0,255[/color]
[*][color=#333333]color 6 120,0,255[/color]
[*][color=#333333]color 7 150,0,255[/color]
[*][color=#333333]color 8 180,0,255[/color]
[*][color=#333333]color 9 210,0,255[/color]
[*][color=#333333]color 10 240,0,255[/color]
[*][color=#333333]color 11 270,0,255[/color]
[*][color=#333333]color 12 300,0,255[/color]
[*][color=#333333]color 13 330,0,255[/color]
[*][color=#333333]color 14 0,0,0[/color]
[*][color=#333333]color 15 0,0,0[/color]
[*][color=#333333]mode_color 0 0 1[/color]
[*][color=#333333]mode_color 0 1 11[/color]
[*][color=#333333]mode_color 0 2 2[/color]
[*][color=#333333]mode_color 0 3 13[/color]
[*][color=#333333]mode_color 0 4 10[/color]
[*][color=#333333]mode_color 0 5 3[/color]
[*][color=#333333]mode_color 1 0 5[/color]
[*][color=#333333]mode_color 1 1 11[/color]
[*][color=#333333]mode_color 1 2 3[/color]
[*][color=#333333]mode_color 1 3 13[/color]
[*][color=#333333]mode_color 1 4 10[/color]
[*][color=#333333]mode_color 1 5 3[/color]
[*][color=#333333]mode_color 2 0 10[/color]
[*][color=#333333]mode_color 2 1 11[/color]
[*][color=#333333]mode_color 2 2 4[/color]
[*][color=#333333]mode_color 2 3 13[/color]
[*][color=#333333]mode_color 2 4 10[/color]
[*][color=#333333]mode_color 2 5 3[/color]
[*][color=#333333]mode_color 3 0 8[/color]
[*][color=#333333]mode_color 3 1 11[/color]
[*][color=#333333]mode_color 3 2 4[/color]
[*][color=#333333]mode_color 3 3 13[/color]
[*][color=#333333]mode_color 3 4 10[/color]
[*][color=#333333]mode_color 3 5 3[/color]
[*][color=#333333]mode_color 4 0 7[/color]
[*][color=#333333]mode_color 4 1 11[/color]
[*][color=#333333]mode_color 4 2 3[/color]
[*][color=#333333]mode_color 4 3 13[/color]
[*][color=#333333]mode_color 4 4 10[/color]
[*][color=#333333]mode_color 4 5 3[/color]
[*][color=#333333]mode_color 5 0 9[/color]
[*][color=#333333]mode_color 5 1 11[/color]
[*][color=#333333]mode_color 5 2 2[/color]
[*][color=#333333]mode_color 5 3 13[/color]
[*][color=#333333]mode_color 5 4 10[/color]
[*][color=#333333]mode_color 5 5 3[/color]
[*][color=#333333]mode_color 6 0 6[/color]
[*][color=#333333]mode_color 6 1 10[/color]
[*][color=#333333]mode_color 6 2 1[/color]
[*][color=#333333]mode_color 6 3 0[/color]
[*][color=#333333]mode_color 6 4 0[/color]
[*][color=#333333]mode_color 6 5 2[/color]
[*][color=#333333]mode_color 6 6 3[/color]
[*][color=#333333]mode_color 6 7 6[/color]
[*][color=#333333]mode_color 6 8 0[/color]
[*][color=#333333]mode_color 6 9 0[/color]
[*][color=#333333]mode_color 6 10 0[/color]
[*][color=#333333]mode_color 7 0 3[/color]
[*][color=#333333]aux 0 0 0 1700 2100[/color]
[*][color=#333333]aux 1 28 1 1700 2100[/color]
[*][color=#333333]aux 2 2 1 900 1700[/color]
[*][color=#333333]aux 3 27 4 925 1325[/color]
[*][color=#333333]aux 4 13 3 1700 2100[/color]
[*][color=#333333]aux 5 26 2 1700 2100[/color]
[*][color=#333333]aux 6 0 0 900 900[/color]
[*][color=#333333]aux 7 0 0 900 900[/color]
[*][color=#333333]aux 8 0 0 900 900[/color]
[*][color=#333333]aux 9 0 0 900 900[/color]
[*][color=#333333]aux 10 0 0 900 900[/color]
[*][color=#333333]aux 11 0 0 900 900[/color]
[*][color=#333333]aux 12 0 0 900 900[/color]
[*][color=#333333]aux 13 0 0 900 900[/color]
[*][color=#333333]aux 14 0 0 900 900[/color]
[*][color=#333333]aux 15 0 0 900 900[/color]
[*][color=#333333]aux 16 0 0 900 900[/color]
[*][color=#333333]aux 17 0 0 900 900[/color]
[*][color=#333333]aux 18 0 0 900 900[/color]
[*][color=#333333]aux 19 0 0 900 900[/color]
[*][color=#333333]adjrange 0 0 0 900 900 0 0[/color]
[*][color=#333333]adjrange 1 0 0 900 900 0 0[/color]
[*][color=#333333]adjrange 2 0 0 900 900 0 0[/color]
[*][color=#333333]adjrange 3 0 0 900 900 0 0[/color]
[*][color=#333333]adjrange 4 0 0 900 900 0 0[/color]
[*][color=#333333]adjrange 5 0 0 900 900 0 0[/color]
[*][color=#333333]adjrange 6 0 0 900 900 0 0[/color]
[*][color=#333333]adjrange 7 0 0 900 900 0 0[/color]
[*][color=#333333]adjrange 8 0 0 900 900 0 0[/color]
[*][color=#333333]adjrange 9 0 0 900 900 0 0[/color]
[*][color=#333333]adjrange 10 0 0 900 900 0 0[/color]
[*][color=#333333]adjrange 11 0 0 900 900 0 0[/color]
[*][color=#333333]adjrange 12 0 0 900 900 0 0[/color]
[*][color=#333333]adjrange 13 0 0 900 900 0 0[/color]
[*][color=#333333]adjrange 14 0 0 900 900 0 0[/color]
[*][color=#333333]rxrange 0 1000 2000[/color]
[*][color=#333333]rxrange 1 1000 2000[/color]
[*][color=#333333]rxrange 2 1000 2000[/color]
[*][color=#333333]rxrange 3 1000 2000[/color]
[*][color=#333333]rxfail 0 a[/color]
[*][color=#333333]rxfail 1 a[/color]
[*][color=#333333]rxfail 2 a[/color]
[*][color=#333333]rxfail 3 a[/color]
[*][color=#333333]rxfail 4 h[/color]
[*][color=#333333]rxfail 5 h[/color]
[*][color=#333333]rxfail 6 h[/color]
[*][color=#333333]rxfail 7 h[/color]
[*][color=#333333]rxfail 8 h[/color]
[*][color=#333333]rxfail 9 h[/color]
[*][color=#333333]rxfail 10 h[/color]
[*][color=#333333]rxfail 11 h[/color]
[*][color=#333333]rxfail 12 h[/color]
[*][color=#333333]rxfail 13 h[/color]
[*][color=#333333]rxfail 14 h[/color]
[*][color=#333333]rxfail 15 h[/color]
[*][color=#333333]rxfail 16 h[/color]
[*][color=#333333]rxfail 17 h[/color]
[*][color=#333333]set task_statistics = ON[/color]
[*][color=#333333]set mid_rc = 1500[/color]
[*][color=#333333]set min_check = 1100[/color]
[*][color=#333333]set max_check = 1900[/color]
[*][color=#333333]set rssi_channel = 0[/color]
[*][color=#333333]set rssi_scale = 30[/color]
[*][color=#333333]set rc_interp = AUTO[/color]
[*][color=#333333]set rc_interp_ch = RP[/color]
[*][color=#333333]set rc_interp_int = 19[/color]
[*][color=#333333]set rssi_invert = OFF[/color]
[*][color=#333333]set input_filtering_mode = OFF[/color]
[*][color=#333333]set fpv_mix_degrees = 5[/color]
[*][color=#333333]set max_aux_channels = 14[/color]
[*][color=#333333]set debug_mode = NONE[/color]
[*][color=#333333]set min_throttle = 1016[/color]
[*][color=#333333]set max_throttle = 2000[/color]
[*][color=#333333]set min_command = 1000[/color]
[*][color=#333333]set digital_idle_percent = 4.500[/color]
[*][color=#333333]set 3d_deadband_low = 1406[/color]
[*][color=#333333]set 3d_deadband_high = 1514[/color]
[*][color=#333333]set 3d_neutral = 1460[/color]
[*][color=#333333]set 3d_deadband_throttle = 50[/color]
[*][color=#333333]set use_unsynced_pwm = OFF[/color]
[*][color=#333333]set motor_pwm_protocol = ONESHOT42[/color]
[*][color=#333333]set motor_pwm_rate = 480[/color]
[*][color=#333333]set disarm_kill_switch = ON[/color]
[*][color=#333333]set gyro_cal_on_first_arm = OFF[/color]
[*][color=#333333]set auto_disarm_delay = 5[/color]
[*][color=#333333]set small_angle = 25[/color]
[*][color=#333333]set fixedwing_althold_dir = 1[/color]
[*][color=#333333]set reboot_character = 82[/color]
[*][color=#333333]set serial_update_rate_hz = 100[/color]
[*][color=#333333]set gps_provider = NMEA[/color]
[*][color=#333333]set gps_sbas_mode = AUTO[/color]
[*][color=#333333]set gps_auto_config = ON[/color]
[*][color=#333333]set gps_auto_baud = OFF[/color]
[*][color=#333333]set gps_wp_radius = 200[/color]
[*][color=#333333]set nav_controls_heading = ON[/color]
[*][color=#333333]set nav_speed_min = 100[/color]
[*][color=#333333]set nav_speed_max = 300[/color]
[*][color=#333333]set nav_slew_rate = 30[/color]
[*][color=#333333]set beeper_inversion = ON[/color]
[*][color=#333333]set beeper_od = OFF[/color]
[*][color=#333333]set serialrx_provider = SBUS[/color]
[*][color=#333333]set sbus_inversion = ON[/color]
[*][color=#333333]set spektrum_sat_bind = 0[/color]
[*][color=#333333]set spektrum_sat_bind_autorst = 1[/color]
[*][color=#333333]set tlm_switch = OFF[/color]
[*][color=#333333]set tlm_inversion = ON[/color]
[*][color=#333333]set sport_halfduplex = ON[/color]
[*][color=#333333]set frsky_default_lat = 0.000[/color]
[*][color=#333333]set frsky_default_long = 0.000[/color]
[*][color=#333333]set frsky_gps_format = 0[/color]
[*][color=#333333]set frsky_unit = IMPERIAL[/color]
[*][color=#333333]set frsky_vfas_precision = 0[/color]
[*][color=#333333]set frsky_vfas_cell_voltage = OFF[/color]
[*][color=#333333]set hott_alarm_int = 5[/color]
[*][color=#333333]set pid_in_tlm = OFF[/color]
[*][color=#333333]set bat_capacity = 0[/color]
[*][color=#333333]set vbat_scale = 110[/color]
[*][color=#333333]set vbat_max_cell_voltage = 43[/color]
[*][color=#333333]set vbat_min_cell_voltage = 33[/color]
[*][color=#333333]set vbat_warning_cell_voltage = 35[/color]
[*][color=#333333]set vbat_hysteresis = 1[/color]
[*][color=#333333]set ibat_scale = 400[/color]
[*][color=#333333]set ibat_offset = 0[/color]
[*][color=#333333]set mwii_ibat_output = OFF[/color]
[*][color=#333333]set current_meter_type = ADC[/color]
[*][color=#333333]set battery_meter_type = ADC[/color]
[*][color=#333333]set bat_detect_thresh = 55[/color]
[*][color=#333333]set use_vbat_alerts = ON[/color]
[*][color=#333333]set use_cbat_alerts = OFF[/color]
[*][color=#333333]set cbat_alert_percent = 10[/color]
[*][color=#333333]set align_gyro = DEFAULT[/color]
[*][color=#333333]set align_acc = DEFAULT[/color]
[*][color=#333333]set align_mag = DEFAULT[/color]
[*][color=#333333]set align_board_roll = 0[/color]
[*][color=#333333]set align_board_pitch = 0[/color]
[*][color=#333333]set align_board_yaw = 0[/color]
[*][color=#333333]set gyro_lpf = OFF[/color]
[*][color=#333333]set gyro_sync_denom = 4[/color]
[*][color=#333333]set gyro_use_32khz = OFF[/color]
[*][color=#333333]set gyro_lowpass_type = PT1[/color]
[*][color=#333333]set gyro_lowpass = 90[/color]
[*][color=#333333]set gyro_notch1_hz = 400[/color]
[*][color=#333333]set gyro_notch1_cut = 300[/color]
[*][color=#333333]set gyro_notch2_hz = 200[/color]
[*][color=#333333]set gyro_notch2_cut = 100[/color]
[*][color=#333333]set moron_threshold = 48[/color]
[*][color=#333333]set imu_dcm_kp = 2500[/color]
[*][color=#333333]set imu_dcm_ki = 0[/color]
[*][color=#333333]set alt_hold_deadband = 40[/color]
[*][color=#333333]set alt_hold_fast_change = ON[/color]
[*][color=#333333]set deadband = 0[/color]
[*][color=#333333]set yaw_deadband = 0[/color]
[*][color=#333333]set thr_corr_value = 0[/color]
[*][color=#333333]set thr_corr_angle = 800[/color]
[*][color=#333333]set yaw_control_direction = 1[/color]
[*][color=#333333]set yaw_motor_direction = 1[/color]
[*][color=#333333]set servo_center_pulse = 1500[/color]
[*][color=#333333]set tri_unarmed_servo = ON[/color]
[*][color=#333333]set servo_lowpass_hz = 400[/color]
[*][color=#333333]set servo_lowpass = OFF[/color]
[*][color=#333333]set servo_pwm_rate = 50[/color]
[*][color=#333333]set gimbal_mode = NORMAL[/color]
[*][color=#333333]set channel_forwarding_start = 4[/color]
[*][color=#333333]set airmode_start_throttle = 1350[/color]
[*][color=#333333]set failsafe_delay = 10[/color]
[*][color=#333333]set failsafe_off_delay = 10[/color]
[*][color=#333333]set failsafe_throttle = 1000[/color]
[*][color=#333333]set failsafe_kill_switch = OFF[/color]
[*][color=#333333]set failsafe_throttle_low_delay = 100[/color]
[*][color=#333333]set failsafe_procedure = DROP[/color]
[*][color=#333333]set rx_min_usec = 885[/color]
[*][color=#333333]set rx_max_usec = 2115[/color]
[*][color=#333333]set acc_hardware = AUTO[/color]
[*][color=#333333]set acc_lpf_hz = 10[/color]
[*][color=#333333]set accxy_deadband = 40[/color]
[*][color=#333333]set accz_deadband = 40[/color]
[*][color=#333333]set acc_unarmedcal = ON[/color]
[*][color=#333333]set acc_trim_pitch = -8[/color]
[*][color=#333333]set acc_trim_roll = 0[/color]
[*][color=#333333]set baro_tab_size = 21[/color]
[*][color=#333333]set baro_noise_lpf = 0.600[/color]
[*][color=#333333]set baro_cf_vel = 0.985[/color]
[*][color=#333333]set baro_cf_alt = 0.965[/color]
[*][color=#333333]set baro_hardware = NONE[/color]
[*][color=#333333]set mag_hardware = NONE[/color]
[*][color=#333333]set mag_declination = 0[/color]
[*][color=#333333]set pid_process_denom = 2[/color]
[*][color=#333333]set blackbox_rate_num = 1[/color]
[*][color=#333333]set blackbox_rate_denom = 1[/color]
[*][color=#333333]set blackbox_device = SPIFLASH[/color]
[*][color=#333333]set blackbox_on_motor_test = OFF[/color]
[*][color=#333333]set magzero_x = 0[/color]
[*][color=#333333]set magzero_y = 0[/color]
[*][color=#333333]set magzero_z = 0[/color]
[*][color=#333333]set ledstrip_visual_beeper = OFF[/color]
[*][color=#333333]set displayport_msp_col_adjust = 0[/color]
[*][color=#333333]set displayport_msp_row_adjust = 0[/color]
[*][color=#333333]profile 0[/color]
[*][color=#333333] [/color]
[*][color=#333333]set gps_pos_p = 15[/color]
[*][color=#333333]set gps_pos_i = 0[/color]
[*][color=#333333]set gps_pos_d = 0[/color]
[*][color=#333333]set gps_posr_p = 34[/color]
[*][color=#333333]set gps_posr_i = 14[/color]
[*][color=#333333]set gps_posr_d = 53[/color]
[*][color=#333333]set gps_nav_p = 25[/color]
[*][color=#333333]set gps_nav_i = 33[/color]
[*][color=#333333]set gps_nav_d = 83[/color]
[*][color=#333333]set pidsum_limit = 0.500[/color]
[*][color=#333333]set pidsum_limit_yaw = 0.500[/color]
[*][color=#333333]set d_lowpass_type = BIQUAD[/color]
[*][color=#333333]set d_lowpass = 100[/color]
[*][color=#333333]set d_notch_hz = 260[/color]
[*][color=#333333]set d_notch_cut = 160[/color]
[*][color=#333333]set vbat_pid_gain = OFF[/color]
[*][color=#333333]set pid_at_min_throttle = ON[/color]
[*][color=#333333]set anti_gravity_thresh = 350[/color]
[*][color=#333333]set anti_gravity_gain = 3.000[/color]
[*][color=#333333]set setpoint_relax_ratio = 100[/color]
[*][color=#333333]set d_setpoint_weight = 60[/color]
[*][color=#333333]set yaw_accel_limit = 10.000[/color]
[*][color=#333333]set accel_limit = 0.000[/color]
[*][color=#333333]set iterm_windup = 50[/color]
[*][color=#333333]set yaw_lowpass = 0[/color]
[*][color=#333333]set p_pitch = 58[/color]
[*][color=#333333]set i_pitch = 50[/color]
[*][color=#333333]set d_pitch = 35[/color]
[*][color=#333333]set p_roll = 44[/color]
[*][color=#333333]set i_roll = 40[/color]
[*][color=#333333]set d_roll = 30[/color]
[*][color=#333333]set p_yaw = 70[/color]
[*][color=#333333]set i_yaw = 45[/color]
[*][color=#333333]set d_yaw = 20[/color]
[*][color=#333333]set p_alt = 50[/color]
[*][color=#333333]set i_alt = 0[/color]
[*][color=#333333]set d_alt = 0[/color]
[*][color=#333333]set p_level = 50[/color]
[*][color=#333333]set i_level = 50[/color]
[*][color=#333333]set d_level = 100[/color]
[*][color=#333333]set p_vel = 55[/color]
[*][color=#333333]set i_vel = 55[/color]
[*][color=#333333]set d_vel = 75[/color]
[*][color=#333333]set level_sensitivity = 55[/color]
[*][color=#333333]set level_limit = 55[/color]
[*][color=#333333]rateprofile 0[/color]
[*][color=#333333]rateprofile 0[/color]
[*][color=#333333] [/color]
[*][color=#333333]set rc_rate = 100[/color]
[*][color=#333333]set rc_rate_yaw = 100[/color]
[*][color=#333333]set rc_expo = 0[/color]
[*][color=#333333]set rc_yaw_expo = 0[/color]
[*][color=#333333]set thr_mid = 50[/color]
[*][color=#333333]set thr_expo = 0[/color]
[*][color=#333333]set roll_srate = 70[/color]
[*][color=#333333]set pitch_srate = 70[/color]
[*][color=#333333]set yaw_srate = 70[/color]
[*][color=#333333]set tpa_rate = 10[/color]
[*][color=#333333]set tpa_breakpoint = 1650[/color]
[/list]
Posts: 2,410 Threads: 136 Likes Received: 1,790 in 1,052 posts Likes Given: 3,302 Joined: Jan 2017 Reputation: 50 I am still learning as well but to me that looks like a very noisy build. Someone with more experience in blackbox and filters will be along soon I'm sure. Might need to do some soft mounting and tuning for sure.
Might be worth starting a thread in General Discussion under Beginner Questions to get more exposure too. • Posts: 7 Threads: 2 Likes Received: 1 in 1 posts Likes Given: 0 Joined: Jun 2017 Reputation: 0 • Posts: 1,590 Threads: 89 Likes Received: 1,283 in 768 posts Likes Given: 1,274 Joined: Jan 2017 Reputation: 31 Welcome Alexplose,
I don't have much help for you but its definitely a good place to look for it. carl.vegas
Current Quads: Operational: Diatone GT2 200 In need of repair: Bumble Bee, tehStein, Slightly modified Vortex 250 • Posts: 33 Threads: 6 Likes Received: 26 in 15 posts Likes Given: 2 Joined: Jun 2017 Reputation: 0 Wow. That's intense! Does everyone that plans to fly a quad have to learn all those 8,766 lines of programming and a where does a newbie even start to understand that? I thought it was hard learning how to fly a helicopter. Ha! HOVER OBSESSIVELY Posts: 7 Threads: 2 Likes Received: 1 in 1 posts Likes Given: 0 Joined: Jun 2017 Reputation: 0 This is 9nly a dump of the FC configuration, there is a tool to manage all these settings. • Posts: 2,416 Threads: 51 Likes Received: 1,861 in 1,175 posts Likes Given: 3,315 Joined: Mar 2016 Reputation: 74 13-Jun-2017, 10:08 PM (This post was last modified: 13-Jun-2017, 10:09 PM by sloscotty.) (13-Jun-2017, 07:58 PM)gary dahms Wrote: Wow. That's intense! Does everyone that plans to fly a quad have to learn all those 8,766 lines of programming and a where does a newbie even start to understand that? I thought it was hard learning how to fly a helicopter. Ha! Short answer - No.  . You will learn things as you need/want to. Don't be intimidated by lots of code dumps. Get/build your quad, look at a few videos on configuration, ask questions - it's easier than flying a helicopter (must be, because I can't fly a helicopter).  Posts: 2,410 Threads: 136 Likes Received: 1,790 in 1,052 posts Likes Given: 3,302 Joined: Jan 2017 Reputation: 50 (13-Jun-2017, 07:58 PM)gary dahms Wrote: Wow. That's intense! Does everyone that plans to fly a quad have to learn all those 8,766 lines of programming and a where does a newbie even start to understand that? I thought it was hard learning how to fly a helicopter. Ha! That's why we post it here and let the computer pro's handle it We honestly are a team/family here. Each with our own strengths and weaknesses. Together we get  done! Posts: 33 Threads: 6 Likes Received: 26 in 15 posts Likes Given: 2 Joined: Jun 2017 Reputation: 0 |
