01-Jan-2018, 05:58 AM
I just saved you the trouble. Here is the latest firmware for XJT module.
GOT TO BE A BETTER WAY !!!!! |
01-Jan-2018, 06:05 AM (This post was last modified: 01-Jan-2018, 06:07 AM by JD Quad Jammer.) (01-Jan-2018, 05:58 AM)voodoo614 Wrote: I just saved you the trouble. Here is the latest firmware for XJT module. HOLY SHIT !!!! thks... Why couldnt i find it .. im gonna try this in the morning !!!!! HAPPY NEW YEARS ..VooDoo. many thks. i hope to GOD it works.....get;n old...... lol now can i load this on the SD card via my laptop .. then flash it ???? 01-Jan-2018, 06:11 AM Yes it should flash. 01-Jan-2018, 03:48 PM Extract the file with winrar 01-Jan-2018, 04:37 PM (01-Jan-2018, 06:11 AM)voodoo614 Wrote: Yes it should flash. OK I have totally reached the end of my rope .......downloaded the XJT software install it...... I even switched out my FC...... everything remains the same if I plug the lipo in without holding the FS button The red light flashes... if I hold the FS button down and power up while radio is in bind mode both red and green light glow steady .... 01-Jan-2018, 07:33 PM You are sure taranis is non EU...my x4rsb was doing the same with the l lights and it was a firmware mismatch between taranis and receiver. Flash taranis to euro and receiver to euro lbt. I was at this for ages and eventually sussed it myself . It was the same lights you are getting but bound right away when I got it right . Keep going ? 01-Jan-2018, 07:59 PM (01-Jan-2018, 04:37 PM)JD Quad Jammer Wrote: OK I have totally reached the end of my rope .......downloaded the XJT software install it...... I even switched out my FC...... everything remains the same if I plug the lipo in without holding the FS button The red light flashes... if I hold the FS button down and power up while radio is in bind mode both red and green light glow steady .... FC doesn't matter for binding. You can have just a 5V supply for binding. Are you sure that you have the correct firmware for both TX and RX. Either both Non-EU or both EU? 01-Jan-2018, 08:19 PM (01-Jan-2018, 07:59 PM)voodoo614 Wrote: FC doesn't matter for binding. You can have just a 5V supply for binding. Are you sure that you have the correct firmware for both TX and RX. Either both Non-EU or both EU? In one of the download you sent me It showed me how to determine if mine was a EU or non EU version according to that video I have a non EU version because in the mode selection I can select D8 D16 and LR12 According to the video that determines it is a non EU version 01-Jan-2018, 08:23 PM (01-Jan-2018, 07:33 PM)Droning Martyn Wrote: You are sure taranis is non EU...my x4rsb was doing the same with the l lights and it was a firmware mismatch between taranis and receiver. Flash taranis to euro and receiver to euro lbt. I was at this for ages and eventually sussed it myself . It was the same lights you are getting but bound right away when I got it right . Keep going ? according to all the video's ive seen and watched i have a non eu version . because in the MODE section i can pick D8, D16, and LR12.... i also tried what you said and flashed the receiver to a non eu but the same results..... 01-Jan-2018, 08:53 PM (This post was last modified: 01-Jan-2018, 08:55 PM by Droning Martyn.) No You can have these modes in euro I didn't say flash anything non euro ...just flash the x4rsb with euro lbt and try to bind Make sure it is euro lbt ....the plain euro one would not work for me 01-Jan-2018, 09:15 PM (01-Jan-2018, 08:53 PM)Droning Martyn Wrote: No when i go to Frsky under x4rsb receiver tab there is no euro or non euro LBT files ????? 01-Jan-2018, 09:32 PM (This post was last modified: 01-Jan-2018, 09:33 PM by Droning Martyn.) It's euro not non euro ...lbt is a European standard only ...get the euro lbt and flash your x4rsb Try it and if it works your taranis transmitter is actually euro 01-Jan-2018, 09:35 PM (This post was last modified: 01-Jan-2018, 09:36 PM by Droning Martyn.) This takes a minute to do and sort...been trying to saysince yesterday . If you have non euro firmware on x4rsb and it won't flash then chances are you have a firmware mismatch and your taranis is actually euro. So you need euro lbt...try it and if it doesn't work you can flash it back Euro lbt 01-Jan-2018, 09:50 PM (01-Jan-2018, 09:35 PM)Droning Martyn Wrote: This takes a minute to do and sort...been trying to saysince yesterday . If you have non euro firmware on x4rsb and it won't flash then chances are you have a firmware mismatch and your taranis is actually euro. So you need euro lbt...try it and if it doesn't work you can flash it back Droning Martyn: PLEASE dont take this wrong!!!! i mean this in a KILLER GOOD way !!!! THANKS for being a PRESISTANT BASTARD lol... IT WORKED !!!! DAMN...... i dont know why it didnt before when i tried it ... but S.O.B. now onto the next headache !!!! 01-Jan-2018, 10:42 PM Great news A helpful video for your next step |
« Next Oldest | Next Newest » |