If you enjoy our forum, why not join us? :) Login removes all the ads too! Click here to register in a few simple steps

Login to remove this ad | Register Here
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
GOT TO BE A BETTER WAY !!!!!
#46
I just saved you the trouble.  Here is the latest firmware for XJT module.


Attached Files
.zip   XJT-Ver170317.zip (Size: 136.58 KB / Downloads: 5)
Reply
#47
(01-Jan-2018, 05:58 AM)voodoo614 Wrote: I just saved you the trouble.  Here is the latest firmware for XJT module.

HOLY SHIT !!!!   thks...  Why couldnt i find it .. im gonna try this in the morning !!!!!  HAPPY NEW YEARS ..VooDoo.   many thks.  i hope to GOD it works.....get;n old...... lol

now can i load this on the SD card via my laptop .. then flash it ????
Reply
#48
Yes it should flash.
Reply
Login to remove this ad | Register Here
#49
Extract the file with winrar
Reply
#50
(01-Jan-2018, 06:11 AM)voodoo614 Wrote: Yes it should flash.

OK I have totally reached the end of my rope .......downloaded the XJT software install it...... I even switched out my FC...... everything remains the same if I plug the lipo in without holding the FS button The red light flashes...   if I hold the FS button down and power up while radio is in bind mode both red and green light glow steady ....
Reply
#51
You are sure taranis is non EU...my x4rsb was doing the same with the l lights and it was a firmware mismatch between taranis and receiver. Flash taranis to euro and receiver to euro lbt. I was at this for ages and eventually sussed it myself . It was the same lights you are getting but bound right away when I got it right . Keep going ?
Reply
Login to remove this ad | Register Here
#52
(01-Jan-2018, 04:37 PM)JD Quad Jammer Wrote: OK I have totally reached the end of my rope .......downloaded the XJT software install it...... I even switched out my FC...... everything remains the same if I plug the lipo in without holding the FS button The red light flashes...   if I hold the FS button down and power up while radio is in bind mode both red and green light glow steady ....

FC doesn't matter for binding. You can have just a 5V supply for binding. Are you sure that you have the correct firmware for both TX and RX. Either both Non-EU or both EU?
Reply
#53
(01-Jan-2018, 07:59 PM)voodoo614 Wrote: FC doesn't matter for binding. You can have just a 5V supply for binding. Are you sure that you have the correct firmware for both TX and RX. Either both Non-EU or both EU?

In one of the download you sent me It showed me how to determine if mine was a EU or non EU version according to that video I have a non EU version because in the mode selection I can select D8 D16 and LR12 According to the video that determines it is a non EU version
Reply
#54
(01-Jan-2018, 07:33 PM)Droning Martyn Wrote: You are sure taranis is non EU...my x4rsb  was doing the same with the l lights and it was a firmware mismatch between taranis and receiver. Flash taranis to euro and receiver to euro lbt. I was at this for ages and eventually sussed it myself . It was the same lights you are getting  but bound right away when I got it right . Keep going ?

according  to all the video's ive seen and watched i have a non eu version . because in the MODE section i can pick D8, D16, and LR12.... i also tried what you said and flashed the receiver to a non eu but the same results.....
Reply
Login to remove this ad | Register Here
#55
No
You can have these modes in euro
I didn't say flash anything non euro ...just flash the x4rsb with euro lbt and try to bind

Make sure it is euro lbt ....the plain euro one would not work for me
Reply
#56
(01-Jan-2018, 08:53 PM)Droning Martyn Wrote: No
You can have these modes in  euro
I didn't say flash anything non euro ...just flash the x4rsb with euro lbt and try to bind

Make sure it is euro lbt ....the plain euro one would not work for me

when i go to Frsky under x4rsb receiver tab there is no euro or non euro LBT files ?????
Reply
#57
It's euro not non euro ...lbt is a European standard only ...get the euro lbt and flash your x4rsb

Try it and if it works your taranis transmitter is actually euro
Reply
Login to remove this ad | Register Here
#58
This takes a minute to do and sort...been trying to saysince yesterday . If you have non euro firmware on x4rsb and it won't flash then chances are you have a firmware mismatch and your taranis is actually euro. So you need euro lbt...try it and if it doesn't work you can flash it back
Euro lbt
Reply
#59
(01-Jan-2018, 09:35 PM)Droning Martyn Wrote: This takes a minute to do and sort...been trying to saysince yesterday . If you have non euro firmware on x4rsb and it won't flash then chances are you have a firmware mismatch and your taranis is actually euro. So you need euro lbt...try it and if it doesn't work you can flash it back
Euro lbt

Droning Martyn:    PLEASE dont take this wrong!!!!  i mean this in a KILLER GOOD way !!!!  THANKS for being a PRESISTANT BASTARD  lol...   IT WORKED !!!!   DAMN......  i dont know why it didnt before when i tried it ...  but S.O.B.    now onto the next headache !!!!
Reply
#60
Great news
A helpful video for your next step
Reply
Login to remove this ad | Register Here