If you enjoy our forum, why not join us? :) Login removes all the ads too! Click here to register in a few simple steps
We started a spare parts donation program, check it out :) http://intofpv.com/forum-spare-parts-exchange
Our IntoFPV LiPo Straps are back in stock! Purchase Here

Login to remove this ad | Register Here
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Gearbest Tiny QX90 Whoopie review
I have just noticed the PIDs are the same! Then the only thing you can do is tune them. Well, good luck Big Grin
Damn... So. I wonder if I can use 2s on mine.. Or maybe not, the vtx only takes 5v max
I think you can switch the FC over for 2S (soldering across two pads on the board), but as you said, camera is only good for 3.3 - 5v.
"Damn the torpedoes!!!  Full speed ahead!!!"
Login to remove this ad | Register Here
On this one, there is a soldering jumper on the FC which switches between 1S and 2S
Why don't you use one cell from the 2S lipo to power up the VTX and the 2S for the FC and motors.
You can split the cells if you are not going to unbalance the lipo too much.
The FC has a 5V BEC for the receiver and the camera
Login to remove this ad | Register Here

Possibly Related Threads...
Thread Author Replies Views Last Post
  Build Building the Tiny Whoov (a tiny whoover-craft) sloscotty 10 893 05-Feb-2018, 02:09 PM
Last Post: jimbo_wa
  Flight Problems with Tiny Whoop variant rmcmille 2 245 01-Dec-2017, 10:00 PM
Last Post: rmcmille
  Review "Tiny Whoop" that runs 7mm motors! (spoiler, I like it!) Oscar 19 2,735 12-Aug-2017, 05:59 PM
Last Post: wbdallas
  Tutorial Eachine E010 frame for a Tiny Whoop! Carlos Costa 2 6,408 23-Mar-2017, 12:41 AM
Last Post: Oscar
  Tiny Whoop Boldclash MOTORS and BATTERIES!!! Carlos Costa 0 831 21-Feb-2017, 02:46 PM
Last Post: Carlos Costa