Talking about innovation... check out the FuriousFPV Piggy OSD! 



This new OSD unit is designed to integrate onto the back of the popular HS1177 and HS1190 FPV cameras. 

Once the simple installation is completed and the Piggy is connected to your Kombini (or other FC,) it will offer the possibility of PID tuning via transmitter sticks + Voltage and current monitoring (in Mah usage) all through OSD.

Unclear whether it is MWOSD or something custom, but knowing Furious FPV it's probably something custom. Furious FPV is knocking it out of the park with development of products like this.

Components look like on minimosd micro. Guessing the firmware will be the same

I WANT ONE...or TWO.....

(04-Aug-2016, 05:27 PM)sirdude Wrote: I WANT ONE...or TWO.....

Great find Oscar and great idea, when can we get our hands on them??

I more or less do this with a Micro MinimOSD already, this will make it a bit cleaner tho.

I hope they make another VTX module that can be stacked on the back of the camera and OSD too

I want one but it will remove the supporting holes on Runcam swift and owl plus

(04-Sep-2016, 10:41 AM)Ahmad Ilyas Wrote: I want one but it will remove the supporting holes on Runcam swift and owl plus

you mean the supporting holes on the back lid? good point actually!

(04-Sep-2016, 11:30 AM)Oscar Wrote: you mean the supporting holes on the back lid? good point actually!

Yeah those holes are really helpful
And it may even mean we can't use it with alien frames

---

(04-Sep-2016, 11:30 AM)Oscar Wrote: you mean the supporting holes on the back lid? good point actually!

Yeah those holes are really helpful
And it may even mean we can't use it with alien frames

---

But it may be very good for racing pilots when used with Kombini fc
May even build a Mako like frame with this osd and Kombini FC

I saw the video of it how to connect it to Kombini
In the website they said to bridge 5v pad but in the video they said bridge 12v pads???
Oscar please help because I want one of these for my super light build that I am planning

You are the one who Coul help me

Maybe this helps, taken from FuriousFPV piggy osd product page q&a
. Piggy OSD using 5V BEC from Piko and KOMBINI. Can supply 5V 2A for Piggy OSD and VTX. If you do not use Piko or KOMBINI fc, you need to use a 5V BEC for it.

I want change the Firmware into the Atmega to direct controll the max7456.

Which PINs of the ATMEGA are connected with max7456?
Which PINs of the ATMEGA are connected with FTDI-Modul?