Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
fs-i6s & hglrc f4 v5pro
#1
Hey guys I'm trying to figure out how to get everything connected on my build here but am having the hardest time getting with this one part. If someone could help walk me through where things should go I will be forever in your debt! Because I'm about to throw this out the window... 

the parts I'm working with:

-fs-i6s transmitter ... this receiver says that it does Pwm & PPM... as well as I-bus and S.Bus

-HGLRC F4 V5Pro AIO 

[Image: 8NATlRkl.jpg]

- this receiver fs-ia6b


[Image: cel7je5l.jpg]


Where do I plug what into what??!?!?!?! Please Help!!
Reply
Login to remove this ad | Register Here
#2
You probably want to use ibus, so plug that into ibus servo pins like here: https://i.imgur.com/lf2hMoz_d.jpg?maxwid...elity=high where 1 is the pin marked SBUS on your FC, 2 is 5v and black is gnd

In case you want to use PPM, connect ia6b PPM/CH1 to FC pins marked PPM, 5v and ground respectively

Not sure how i6s works, but you may have to enable ppm or ibus in the tx menu

EDIT: this receiver does not do sbus, only ibus

EDIT2: in case it does not work with ibus connected to sbus, it may have some hardware signal inversion. You may have to connect it to pin marked rx1 and set uart1 as serialrx
Find me on Youtube and Instagram. I currently fly: DRC Aura, NOX5R, Minimalist 112 and drive a scrap RC car
Reply
#3
(31-Jul-2017, 09:05 PM)KonradS Wrote: You probably want to use ibus, so plug that into ibus servo pins like here: https://i.imgur.com/lf2hMoz_d.jpg?maxwid...elity=high where 1 is the pin marked SBUS on your FC, 2 is 5v and black is gnd

In case you want to use PPM, connect ia6b PPM/CH1 to FC pins marked PPM, 5v and ground respectively

Not sure how i6s works, but you may have to enable ppm or ibus in the tx menu

EDIT: this receiver does not do sbus, only ibus

EDIT2: in case it does not work with ibus connected to sbus, it may have some hardware signal inversion. You may have to connect it to pin marked rx1 and set uart1 as serialrx

Thank You! The diagram is awesome, I do have a question about it though. Your saying to plug the SBus line from the FC into B/VCC pin, 5v red line into CH 6? and Ground black line into CH 5 on the receiver? The diagram just has them numbered 1-6 upside down. Also, if this doesn't work (Edit 2Smile RX1 from FC should go into which pin on the receiver? Like in place of the SBus (B/VCC in your diagram)? Also, uart1 being changed to serial RX in Betaflight right?
Reply
#4
Another image Smile
https://nathan.vertile.com/assets/images...9eed4f.jpg
Plug the servo plug into ibus servo marked with the rectangle on the top (sorry, cant edit on the phone to draw a diagram Smile ). You have gnd, v+ ans S (ibus) marked here.
Yes, uart needs to be set to serialrx in betaflight. You also have to choose serial protocol and ibus in the 'config' tab.
Find me on Youtube and Instagram. I currently fly: DRC Aura, NOX5R, Minimalist 112 and drive a scrap RC car
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
Exclamation HGLRC M100-5883 Wiring Fault Coleon 6 188 22-Feb-2024, 10:03 PM
Last Post: iFly4rotors
  HGLRC-KT20 not taking off bar1 6 289 17-Sep-2023, 09:37 PM
Last Post: hugnosed_bat
  Installing HGLRC M100 MINI GPS to Babyhawk II HD d@wn 25 1,666 05-Aug-2023, 08:20 PM
Last Post: iFly4rotors
  HGLRC Sector 5 V3 newbie lilyg 9 364 11-Sep-2022, 10:42 PM
Last Post: Pathfinder075
  telemetry not working hglrc zeus35 avihuh 2 186 23-Apr-2022, 05:26 AM
Last Post: avihuh


Login to remove this ad | Register Here