(18-Aug-2017, 09:21 PM)jamesw Wrote: No soldering required.  Just unscrew the back case, unscrew the gimbals, unplug the wires, and then reverse that process.
Calibration is done via on-screen prompts after install and takes 10 seconds.  

The M7s also come self-centering so you'll have to unlock one of them, and the procedure is different than the regular gimbals, but in both cases it's simply tightening/loosening a screw on the gimbal.

(18-Aug-2017, 08:52 PM)D. Clocktower Wrote: Hey Carl, I have one of these. I use a remote mic on my motorcycle helmet mounted GoPro and tuck the mic inside the helmet cheek pad. I use a 90 deg. connection to eliminate a big loop of cable and to relieve stress at the connection point.

I found mine at MERCADO LIVRE in Brasil. It`s a LOT easier buying in country because of the wonderful the postal system here. (Tom BD Bad can relate)           Anyway, thank you for looking Carl!

Cheers