Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Fresh
#1
Star 
Hi guys, I'm new here (obviously).
I'm 34, living in Belgium and after 2 months or so I finally have all my material ready and
will start building my first quad this week/end. I'm extremely nervous and I'm sure I'm missing
some smaller parts (anti vibration standoffs, servo cables, pins, ...)

My build will be a 
- Realacc X210 Pro
- Infintiy 4S 1300
- Emax 2306 2400kv (whites)
- Littlebees blheli-s 30A
- FC Omnibus F4 Pro V2
- Tramp HV
- Dominator V3 with quanum diversity
- Runcam Eagle
- Turnigy Evolution

Wish me luck!  Cool
[-] The following 1 user Likes grmbl's post:
  • Carl.Vegas
Reply
Login to remove this ad | Register Here
#2
Good luck! And welcome! Big Grin
[-] The following 2 users Like sloscotty's post:
  • grmbl, Tom BD Bad
Reply
#3
Welcome to the best forum online grmbl, and good luck with the build! I have no experience with brushless yet... So I won't be able to provide much help!
If you hit any problems there are loads of guys here all the time, who are more than happy to jump in with suggestions and help, Maxke is in Belgium, so is Pimousse who is quite an experienced member here too. Check out the User Map.

Edit to add ; this thread might help too - http://intofpv.com/t-realacc-x210-pro-first-build
Edit again to add : well found!
Windless fields and smokeless builds
[-] The following 1 user Likes Tom BD Bad's post:
  • grmbl
Reply
#4
Welcome to the forum grmbl, that's a very nice list of parts you have there. Don't be nervous, you'll be punching holes through the clouds before you know it! zoom zoom
[-] The following 2 users Like RENOV8R's post:
  • Tom BD Bad, grmbl
Reply
#5
Welcome mate!
Parts list looks good! should be a really good build and should last a while without upgrading Smile
I would suggest some 5040x3 props for that setup Smile maybe DAL or HQ durables.
Don't be a LOS'er, be an FPV'er :)  My Gear - Facebook - Instagram - Twitter
[-] The following 2 users Like Oscar's post:
  • grmbl, Tom BD Bad
Reply
#6
(14-Jun-2017, 10:46 PM)Oscar Wrote: Welcome mate!
Parts list looks good! should be a really good build and should last a while without upgrading Smile
I would suggest some 5040x3 props for that setup Smile maybe DAL or HQ durables.

Thanks Oscar, I got myself some 5040x3 and 5045x3 (I'm curious about the difference the 45 will give)
I got some sim hours so hopefully I won't crash too much! ;,,;
Reply
#7
Welcome welcome welcome!
Great parts list, and as Oscar mentioned, future proofed (as much as you can in this hobby) Wink

Excited to see your build and progress! Thumbs Up Popcorn
The Obsession IS Real!
My Youtube and Instagram links
Reply
#8
Welcome to the forum.

Agreed on the list, definitely the latest and greatest. Hopefully you'll do a build thread so we all can watch and enjoy the shiny newness Smile

People around here probably get tired of me and my broken record about sims... but they really are a great way to be prepared for when you get in the air and even after too.
carl.vegas
Current Quads: Operational: Diatone GT2 200 In need of repair: Bumble Bee, tehStein,  Slightly modified Vortex 250 
[-] The following 1 user Likes Carl.Vegas's post:
  • grmbl
Reply
#9
(16-Jun-2017, 08:54 AM)Carl.Vegas Wrote: Hopefully you'll do a build thread so we all can watch and enjoy the shiny newness Smile

Great idea, will do!
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Fresh and new wd-40 9 700 06-Jul-2020, 10:01 AM
Last Post: hugnosed_bat


Login to remove this ad | Register Here