17-Mar-2023, 06:58 AM
So the next thing was that after the re-flash of Betaflight I had no OSD in the EMax Transporter screen!
I'd re-entered the correct MSP port for the HDZero VTX in Config, so not that.
Found in a HDZero VTV fault finding video that the "Auto" setting for displayport device does not work, nor does it find the UART.
SO
set osd displayport_device = MSP
set displayport_msp_serial = (UART No and subtract one) and it was on UART 2, so entered 1
save
And up popped the OSD display!
HURRAH!!
I'd re-entered the correct MSP port for the HDZero VTX in Config, so not that.
Found in a HDZero VTV fault finding video that the "Auto" setting for displayport device does not work, nor does it find the UART.
SO
set osd displayport_device = MSP
set displayport_msp_serial = (UART No and subtract one) and it was on UART 2, so entered 1
save
And up popped the OSD display!
HURRAH!!