If you enjoy our forum, why not join us? :) Login removes all the ads too! Click here to register in a few simple steps

Login to remove this ad | Register Here
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Foxeer Arrow V2 calibrate procedure?
#1
In a comment on his article about the Foxeer Arrow V2 FPV cam, Oscar Liang mentioned 'calibrating' the camera in order to rectify a situation where the battery voltage display is off by a factor of 10. (My camera, like some others, displays "5.2 V" instead of "15.2 V").

Does anyone know how to actuate a re-calibration?

Thanks,

Christopher
#2
1. make sure you are using the 'VSEN' pin is connected to your lipo battery? otherwise you will be getting the camera power supply voltage
2. make sure the voltage number is not partly hidden by the edge of the screen

Here is how to calibrate voltage:
https://oscarliang.com/ctt/uploads/2016/...nual-1.jpg
=>FPV OSD setup
=> Point 4
Don't be a LOS'er, be a FPV'er :) -- Blog - Facebook - Instagram - Twitter - Google Plus
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
Sad Help Foxeer TM25 Sovd 2 311 29-Nov-2016, 08:08 PM
Last Post: Sovd
  Foxeer Antenna problem BigglesFPV 9 1,298 28-Jul-2016, 11:28 PM
Last Post: BigglesFPV
  Foxeer TM600 vtx bad signal - shielding touching electronics Multirotor Army 3 736 01-Jun-2016, 10:31 PM
Last Post: Multirotor Army