Emax skyline 32 acro
littlebee 30amp ESC
EMAX RS2205 2300kv
FRSKY X4RSB
TBS TANGO RADIO
setup FC in BETAFLIGHT and calibrated ESC. all motors work properly we operated through betaflight.
when i power the quad without props and input a very small amount of throttle without increasing it any, the motors will gradually increase in RPM until i move the stick back to zero throttle. its does this constantly we checked the receiver inputs on betaflight and the receiver input is remaining at one valve. please help. i read another post on this same issue possibly and he raised the low pass filter to solve the problem. i made changes to the low pass filters settings and it did not seem to help.
littlebee 30amp ESC
EMAX RS2205 2300kv
FRSKY X4RSB
TBS TANGO RADIO
setup FC in BETAFLIGHT and calibrated ESC. all motors work properly we operated through betaflight.
when i power the quad without props and input a very small amount of throttle without increasing it any, the motors will gradually increase in RPM until i move the stick back to zero throttle. its does this constantly we checked the receiver inputs on betaflight and the receiver input is remaining at one valve. please help. i read another post on this same issue possibly and he raised the low pass filter to solve the problem. i made changes to the low pass filters settings and it did not seem to help.