Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Flips over
#1
Ok guys. I've come a long way with your help. Everything is working. Radio and drone are talking. But when I throttle up the drone wants to flip? All motors and props are proper.
Reply
Login to remove this ad | Register Here
#2
The motors spin in the right direction and the correct motor is connected to the right channel of the flight controller, you can check this in the motor tab from your cleanflight / betaflight.
You may also check if your board orientation is correct.
[-] The following 1 user Likes Dutch Drone Builder's post:
  • oyvinla
Reply
#3
I've done all that. Motors spin in right direction. There numbers are good. Radio is good. It lifts off then flips. Using clean flight
Reply
#4
This may sound silly but do you have the correct props on each motor ?
lol FPV
Ragg-e WBX 5"
BUILD
MY CHANNEL
Reply
#5
Yes dude. Triple check. I can give a little throttle to spin the props. But you give a little more it seems to go hyper then flips. I can get off the ground about 5cm
Reply
#6
Can you maybe make a short movie and upload it so we get a better idea of the problem and maybe some pictures.
Reply
#7
When this has happened to me it is always one of the following things that are wrong:

1. wrong direction on the props.
This is the most common and a good way to remember is that all the props should spin towards the FC. (If you have not changed the direction in the CLI that is which I'm pretty sure you have not).

2. Wrong motor direction.
Same as above.

3. Wrong motor number.
signal cable on the wrong motor pad on the ESC can cause this. Check that the motors spin according to how they should in CF/BF.

4. FC orientation.
Easiest way to check is to activate the accelerometer and check that the brick/quad in CF/BF is moving the same as how you move the quad.

[Image: Beteflight-AirMode-Moror-Stop.png]

A video and maybe a blackbox would be nice Smile
Reply
#8
Thank you my friends so much. It was the smallest over site. It's was in clean flight. The yaw degree was set a 320. In configurator. Don't know how this happened but she's flying.
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  After 1-2 minutues of flight, drone flips over in air doublebubble 22 613 16-Feb-2024, 11:32 PM
Last Post: mstc
  Quad Flips over when Arming wozwasted 47 1,526 18-Nov-2023, 02:38 AM
Last Post: romangpro
Sad My drone throttle goes to the moon and flips out the drone hzzbh3 34 1,381 10-Sep-2023, 11:40 PM
Last Post: Lemonyleprosy
  Drone Flips out mid flight. (info inside) Tobijoe 11 829 28-Oct-2022, 03:15 PM
Last Post: Tobijoe
  Tiny trainer losing control on rolls and flips samuelfpv 4 340 29-Sep-2022, 07:33 AM
Last Post: hugnosed_bat


Login to remove this ad | Register Here