Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Flipping problems....
#1
Not flipping, like the f word... lol
Actually flipping

I installed a new naze32 flight controller, rev6, and my quad is now flipping backwards. I've literally tried everything aside from testing individual motors and ESCs.

Any tips about how to test them individually??? Or alternatively, how to resolve the issue entirely?
Reply
Login to remove this ad | Register Here
#2
I suggest double-checking that your ESC's are plugged into the correct ports on the FC, and/or that your propellors are mounted properly.
(I'm not suggesting they are not, but sometimes those are easy mistakes to make.)
Reply
#3
I would also make sure the FC is installed correctly, ie: the arrow on the board faces the front..if not you have to offset it in Clean Flight.
My youtube channel

Reply
#4
Agree with what Scotty and Biggle said..

Also check you have the correct props installed on the motors...
Don't be a LOS'er, be an FPV'er :)  My Gear - Facebook - Instagram - Twitter
Reply
#5
And did you calibrate your ESCs and set your min_throttle and min_command correctly? When you say "flipping backwards" do you mean on takeoff? Because that sounds exactly like what would happen if your motors aren't all firing at the same time.
Reply
#6
If you go into cleanflight motor testing and check the configeration of your motors then test 1 by 1 you will see for sure if they are in the correct order.( not forgetting to take off the props first!!)
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Problems with Avatar HD V2 Agentu 3 233 15-Feb-2024, 05:35 PM
Last Post: Agentu
  Sudden motor/propeller problems TinyHawk 3 Plus fpvNewbie 8 225 03-Feb-2024, 06:57 PM
Last Post: Rob Axel
  Solved New quad new problems Wolfplay 7 264 26-Jul-2023, 09:09 PM
Last Post: SnowLeopardFPV
  Range Achieving Problems koklimabc 7 340 19-Jul-2023, 02:02 AM
Last Post: koklimabc
  Dji O3 air unit and fpv controller 2 problems throttle goes up on yaw epicjfpv 2 592 07-Jan-2023, 02:12 PM
Last Post: epicjfpv


Login to remove this ad | Register Here