If you enjoy our forum, why not join us? :) Click here to register in a few simple steps

Login to remove this ad | Register Here
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Flight modes on Turnigy 9x(er9x)
#1
I am trying to setup a 3 position switch on my Turnigy 9x (er9x) for the different flight modes in Betaflight. Is it setup similar to a 3 position flap ie... ID0 for angle, ID1 for horizon, and ID2 for acro, right?
#2
You can set it any way you want in the Modes tab of BetaFlight. I don't think there is a "standard". (I use one of my two-position switches, and only use Horizon and Airmode.)
Reply
#3
Yea just use one of the self-level mode and acro Smile
When having Horizon and Angle mode the same time I get confused very easily... I personally just use horizon mode over angle mode since they are very similar, except horizon mode allow you to do flips
A better FPV'er than LOS'er :) -- My Fleet
Reply
Login to remove this ad | Register Here
#4
Does horizon mode give you the ability to dive trees or is that acro only?
Reply
#5
(01-09-2017, 06:49 AM)Volitant_Soul Wrote: Does horizon mode give you the ability to dive trees or is that acro only?

Acro only.
A better FPV'er than LOS'er :) -- My Fleet
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Help with clean flight setup Shawnp204 1 37 Yesterday, 01:48 PM
Last Post: Ikkuh
  Help with x-racer f303 flight controller thepolicepublic 2 121 12-24-2016, 10:17 AM
Last Post: Ikkuh
  Flight Controller Tech Question Arrow 5 179 12-14-2016, 06:07 AM
Last Post: Arrow
  VTX Switching Channels Mid Flight tdogb 12 160 11-25-2016, 08:41 PM
Last Post: tdogb
  Flight Control Board Location Terry 2 204 09-05-2016, 11:43 AM
Last Post: Mikk36