Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Flashing SPRacing F3 Mini
#1
I'm having difficulty flashing new firmware to an SPRacing F3 Mini board. It successfully boots into DFU mode, but then the Cleanflight GUI does nothing. I've tried reinstalling the "STM Device in DFU Mode" Driver, but to no effect.

Am I missing something here? Any ideas?
Reply
Login to remove this ad | Register Here
#2
If you read the SPRacing F3 manual you will see you need to set a custom baud rate. You don't need to touch the bootloader
I love to share and help people! Flying Mini Quad is the best!
Reply
#3
Just checked the SPRacingPro manual (rather than the mini), and it suggests a 256k manual baud rate, but this doesn't work on the mini.

Ah I sorted it, it was a DFU driver issue, I fixed it by following the instructions for my platform on this page:
https://github.com/cleanflight/cleanflig...lashing.md
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  After flashing the ESC using JESC zomer 1 160 18-Sep-2023, 09:50 AM
Last Post: voodoo614
  Help Iflight Seccex-D twin G mini F7 Santhosh_xsb 4 371 07-Sep-2023, 03:42 PM
Last Post: voodoo614
  Help IFlight F7 Mini Wireing question Cantan 3 206 21-Aug-2023, 12:33 PM
Last Post: Cantan
  Flashing custom BF hex file mstc 0 146 11-Jun-2023, 02:54 PM
Last Post: mstc
  Help Diatone MAMBA F405 MINI DJI FC default CLI dump or soft serial setup Original 12 2,400 27-May-2023, 12:38 PM
Last Post: Original


Login to remove this ad | Register Here