29-Feb-2024, 08:06 PM (This post was last modified: 29-Feb-2024, 08:11 PM by Crashesintotrees.)
I have wanted to build my own drone since a while before i got my first drone but it hasn't happened. I am getting more serious about it now and I have a parts list made. I want to run this by the experts to see if I am sane or not.
Speedybee Mario 5 frame Its a new one so probably not much experience here with it
Speedybee ESC FC stack 60amp
Emax EcoII motors
Foxeer Extreme VTX 2.5 Watt version
Radiomaster Ranger Micro Combo (comes with 2 RP1 ExpressLRS 2.4ghz Nano Receiver and 1 RP2 ExpressLRS 2.4ghz Nano Receiver)
runcam Phoenix 2 JB edition
HGLRC mini M100 gps
Some 30 20 and 14 AWG silicone wire
I have a Radiomaster tx12 mkII with the CC2500 protocol hence the ranger micro
My goals for the quad is mostly just normal ripping but some longish range if I can coax enough flight time out of it. I have mostly depleted my supply of 4s batteries so I plan to move to 6s. I want to make sure I haven't forgot something or some incompatibilities or a place to save money.
Speedybee Mario 5 frame Its a new one so probably not much experience here with it
Speedybee ESC FC stack 60amp
Emax EcoII motors
Foxeer Extreme VTX 2.5 Watt version
Radiomaster Ranger Micro Combo (comes with 2 RP1 ExpressLRS 2.4ghz Nano Receiver and 1 RP2 ExpressLRS 2.4ghz Nano Receiver)
runcam Phoenix 2 JB edition
HGLRC mini M100 gps
Some 30 20 and 14 AWG silicone wire
I have a Radiomaster tx12 mkII with the CC2500 protocol hence the ranger micro
My goals for the quad is mostly just normal ripping but some longish range if I can coax enough flight time out of it. I have mostly depleted my supply of 4s batteries so I plan to move to 6s. I want to make sure I haven't forgot something or some incompatibilities or a place to save money.