This is my first quad build. I already all I have right now is the frame motor and esc combo and the FC. The rest I will be ordering. If there is anything else I need please let me know. Also if there is something you think I should change up please feel free to let me know. First build so I need all the help I can get.

Frame- Martian II 220 frame

Motor/esc-
Emax RS2205-2300KV CW/CCW Brushless Motor FVT LittleBee 20A ESC Kingkong 5045 Propeller Power Combo

FC-
Upgrade NAZE32 F3 Flight Controller Acro 6 DOF/Deluxe 10 DOF for Multirotor Racing

Rx for dx6i only using temporary
Orange rx615x

Fatshark attitude v3

Video transmitter-
Lumenier TX5G2R Mini 200mW 5.8GHz FPV Transmitter with Raceband (w/ pigtail SMA)

Antenna-
IBCrazy 5.8 GHz Airscrew Cloverleaf Ultra Antenna (single)

Battery-
Lumenier 1300mAh 4s 60c Lipo Battery (XT60)

Camera-
RunCam Swift - 600TVL Camera 26mmx26mm

I would switch the flight controller as it is a knock off product. I would suggest a SPF3 evo, which is what that is a fake off. Its a great little board for a first build. Also you will need two antenna (unless the attitudes come with a spironet) one for the goggles and one for the quad. I would suggest the TBS Triumph. Its a great little antenna and is quite indestructible. Good luck with your first quad!