Posts: 6
Threads: 3
Likes Received: 0 in 0 posts
Likes Given: 4
Joined: Sep 2016
Reputation:
0 Hi All !
I couldn't find an answer elsewhere so hence my question here from a Newbie !
Does anyone use clip on soft ferrite rings to reduce interference on Multirotors ?
Sorry if this question has been answered elsewhere on the Forum !
• Posts: 1,773
Threads: 30
Likes Received: 1,199 in 755 posts
Likes Given: 714
Joined: Oct 2016
Reputation:
45 Another thing I've found helps is using pieces of USB cable for the vtx. Both power and to the camera. Requires some soldering but as USB cable is shielded, it blocks a lot of noise.
Posts: 947
Threads: 66
Likes Received: 350 in 248 posts
Likes Given: 164
Joined: Apr 2016
Reputation:
34 When I started, I was also very concerned about video noise and tried different methods. At the end of the day, I have found that the easiest solution that works for me is to use a good quality PDB to power the camera with 5V and the VTX with 12V, Rubycon 470uf low esr capacitors on the ESCs to reduce noise and twist the cables that came with the VTX/cam.